Clutch & Pressure Plate - t50 4age/ze 4 puck brassy $300

[mfxae86]

hey guys,

Got a 4 puck brass button clutch plate (exedy)to fit t50 box it has less than 50ks on it tops so its in basically new condition, shortly after this clutch was fitted the diff blew and it along with the box were upgraded (Fseries diff & W58box) so the clutch plate could not be used . it has been sitting on the shelf in the garage collecting dust and figured it could be put to good use on some ones car.
this clutch cost me $490 new so u can save yourself some serious green on this puppy
anyhow im after $300ono can ship at buyers expense, im located in the liverpool area you can contact me on 0415 345 219 plz txt as i may not always be able to take calls

ps. this is the 215mm pres plate type, need other details let me know and i will try and find out.

http://img20.imageshack.us/img20/7466/image002uyb.jpg
http://img193.imageshack.us/img193/5883/image001sgk.jpg

[mfxae86]

sale seems to have fallen through so back up

[mfxae86]

still gots

[daimojay]

were bouts u located?

[mfxae86]

liverpool area

[ae8zn6]

what size flywheel is this to suit?

cause ge and gze and very different... 20v is different again

[mfxae86]

its to fit a ge flywheel, pressure plate mesures 267mm total and 252 to the stud holes

[todd]

measure the contact surface dude, not the entire pressure plate

[joeyjoejoejuniorshabadoo]

brand?
condition?
new / used?
size?

ship?

[mfxae86]

measure the contact surface dude, not the entire pressure plate

thought i mentioned that in the 1st post thats the only other mesurement i could think of giving...? that seems to not be there anymore... ill get back to you shortly

[mfxae86]

1st post fixed up

[Vance]

so is it to suit 16v 200mm fly or 20v 212mm fly?

[mfxae86]

its for the 212mm flywheel

[ToySprinta]

Txt'd and called :)