3sge beams altezza fuel pressure

[JOshua a]

So I got a 3sge beams in my ae86, I was wondering what people are running for fuel pressure? I heard of some people running 40PSI, others 60PSI. I'm not sure what to run. I'm currently putting my fuel setup together now with a walbro 255 in tank, with a return line setup back to the tank. I'm also running full vipec V44 standalone with ITBs if that makes a difference. Some input is appreciated.

Josh

[ehendrikd]

Altezza factory fuel pressure is 62PSI, I have been running this in my Beams AE86 without issue.

[ke_70]

62 stock with returnless.

i've dropped mine down to 40ish psi with a return line.

[JOshua a]

I will also be running a return. So should I set mine to 40ish as well?

[BEAMS_86]

I'm running 50psi in mine But still yet to tune it that's just what we set it at for now.

[Hen may possibly be a nut]

If you're running aftermarket or standalone management then the precise fuel pressure you set is largely irrelevant. High enough for a good spray pattern and enough flow through the injector, low enough so you're not pressing your pump too hard. Then you tune the ECU to supply the right amount of fuel.

[JOshua a]

So set mine up for 42 and tweak it when I get a tune

[ke_70]

yeah pretty much what hen said.
i just used 40psi because that was what the startup/base tune was tuned to.

[JOshua a]

Alright. Thanks homies.
any update on your awesome build Glenn?

[ke_70]

who's glenn?

[JOshua a]

Sorry, I thought your name was Glenn.. I seen it in your sig

[Matt]

http://www.ae86drivingclub.com.au/forums/showthread.php?15433-JDM-BEAMS-Notchback-track-build

[JOshua a]

http://www.ae86drivingclub.com.au/forums/showthread.php?15433-JDM-BEAMS-Notchback-track-build

Ive seen that build several times lol