lappy
14th July 2013, 07:10 PM
As some of you may have seen in my build thread, I've slowly been replacing every conversion part so I'll end up with this whole kit for sale.
I made 124hp and 201nm with this set up and It happily fried 3rd and 4th gear all day long.
All you need to do is buy an engine and box with ecu and wiring, get a tailshaft made, the tunnel will need some love tapping/massaging to fit as it sits quite far back, cut the shifter hole a bit, for better shifter position I bent the shifter backwards and a bonnet scoop or space the crossmembers down(may not work with engine clearance in some areas). I will supply a wiring diagram aswell.
Includes:
Engine crossmember
Gearbox crossmember
Alloy sump
Oil pick up
Extractors 1 3/4" primaries all within 15mm in length
Exaust 2.5" dumps before diff
Intake pipe
AFM set up
Pod filter to suit
Intake pipe heat shield
Top radiator hose
Modified fuel inlet
http://i189.photobucket.com/albums/z187/brenton36/IMG_1934_zps209c790a.jpg
http://www.ae86drivingclub.com.au/dcimages/5/3/7/332629.jpg
http://www.ae86drivingclub.com.au/dcimages/5/3/7/332635.jpg
http://www.ae86drivingclub.com.au/dcimages/5/3/7/275115.jpg
http://www.ae86drivingclub.com.au/dcimages/5/3/7/275118.jpg
http://www.ae86drivingclub.com.au/dcimages/5/3/7/268974.jpg
http://www.ae86drivingclub.com.au/dcimages/5/3/7/268972.jpg
http://www.ae86drivingclub.com.au/dcimages/5/3/7/264993.jpg
http://www.ae86drivingclub.com.au/dcimages/5/3/7/249497.jpg
http://www.ae86drivingclub.com.au/dcimages/5/3/7/249499.jpg
27306
For any more pics/info check my build thread: http://www.ae86drivingclub.com.au/forums/showthread.php/27739-3RZ-Ksev/page17
Here is what I managed to do with this set up:
http://www.youtube.com/watch?v=YrtukB-ImFo
http://www.youtube.com/watch?v=fMpN6G8tm6k
Chasing $2000 If you had to pay for an exhaust shop to make the extractors to this precision and quality alone would be this much if not more
Located in WA, I'm willing to ship Australia wide but the exhaust might have to be cut in half for cheaper postage
I made 124hp and 201nm with this set up and It happily fried 3rd and 4th gear all day long.
All you need to do is buy an engine and box with ecu and wiring, get a tailshaft made, the tunnel will need some love tapping/massaging to fit as it sits quite far back, cut the shifter hole a bit, for better shifter position I bent the shifter backwards and a bonnet scoop or space the crossmembers down(may not work with engine clearance in some areas). I will supply a wiring diagram aswell.
Includes:
Engine crossmember
Gearbox crossmember
Alloy sump
Oil pick up
Extractors 1 3/4" primaries all within 15mm in length
Exaust 2.5" dumps before diff
Intake pipe
AFM set up
Pod filter to suit
Intake pipe heat shield
Top radiator hose
Modified fuel inlet
http://i189.photobucket.com/albums/z187/brenton36/IMG_1934_zps209c790a.jpg
http://www.ae86drivingclub.com.au/dcimages/5/3/7/332629.jpg
http://www.ae86drivingclub.com.au/dcimages/5/3/7/332635.jpg
http://www.ae86drivingclub.com.au/dcimages/5/3/7/275115.jpg
http://www.ae86drivingclub.com.au/dcimages/5/3/7/275118.jpg
http://www.ae86drivingclub.com.au/dcimages/5/3/7/268974.jpg
http://www.ae86drivingclub.com.au/dcimages/5/3/7/268972.jpg
http://www.ae86drivingclub.com.au/dcimages/5/3/7/264993.jpg
http://www.ae86drivingclub.com.au/dcimages/5/3/7/249497.jpg
http://www.ae86drivingclub.com.au/dcimages/5/3/7/249499.jpg
27306
For any more pics/info check my build thread: http://www.ae86drivingclub.com.au/forums/showthread.php/27739-3RZ-Ksev/page17
Here is what I managed to do with this set up:
http://www.youtube.com/watch?v=YrtukB-ImFo
http://www.youtube.com/watch?v=fMpN6G8tm6k
Chasing $2000 If you had to pay for an exhaust shop to make the extractors to this precision and quality alone would be this much if not more
Located in WA, I'm willing to ship Australia wide but the exhaust might have to be cut in half for cheaper postage