stahlz_ae86
12th January 2014, 02:22 PM
Parting out a white manual AE71 CSX sedan with dark blue interior.
Complete package I want to sell without separating...
*ADM T50 with shifter
*Slave Cylinder (new 2 yrs ago)
*Master Cylinder (new 2 yrs ago)
*Hard clutch line
*Pedal Assembly
*Speedo Cable
*Manual gearbox stays
*Sandwich plate
*Starter motor
*Tailshaft
Sold ^
Also have series 2 T18 diff (Complete from drum to drum) with swaybar, comes with tailshaft (correct spline to go in AE71/AE86 gearbox, series 1 T18 are different), axles have near new bearings and seals, linings/shoes and drums still ok from memory. Centre is a 3.7 open that I've never used, had 4.3's in this housing and I'm yet to run the diff with the current centre. It's sealed up filled with oil and ready to run. The guy I bought the centre from said there was some noise. But the value at this price is all there with what you're getting even if the centre needs re-build (most people 3.7's will not be sought after).
Sold ^
Engine crossmember suit 4A.
$120
4A RWD engine mounts (inner and outer).
$80 for set
4A-C good condition 160,000kms old, was originally mated to the auto so it's had an easy life. Currently has the manual sandwich plate and a good HD clutch fitted also.
$150 (less than what the clutch alone cost me)
Tacho cluster
Sold ^
Assorted White panels and Blue interior stuff - ask away for anything...
I'm located Northern suburbs Melbourne near Greensborough/Heidelberg.
Complete package I want to sell without separating...
*ADM T50 with shifter
*Slave Cylinder (new 2 yrs ago)
*Master Cylinder (new 2 yrs ago)
*Hard clutch line
*Pedal Assembly
*Speedo Cable
*Manual gearbox stays
*Sandwich plate
*Starter motor
*Tailshaft
Sold ^
Also have series 2 T18 diff (Complete from drum to drum) with swaybar, comes with tailshaft (correct spline to go in AE71/AE86 gearbox, series 1 T18 are different), axles have near new bearings and seals, linings/shoes and drums still ok from memory. Centre is a 3.7 open that I've never used, had 4.3's in this housing and I'm yet to run the diff with the current centre. It's sealed up filled with oil and ready to run. The guy I bought the centre from said there was some noise. But the value at this price is all there with what you're getting even if the centre needs re-build (most people 3.7's will not be sought after).
Sold ^
Engine crossmember suit 4A.
$120
4A RWD engine mounts (inner and outer).
$80 for set
4A-C good condition 160,000kms old, was originally mated to the auto so it's had an easy life. Currently has the manual sandwich plate and a good HD clutch fitted also.
$150 (less than what the clutch alone cost me)
Tacho cluster
Sold ^
Assorted White panels and Blue interior stuff - ask away for anything...
I'm located Northern suburbs Melbourne near Greensborough/Heidelberg.