vic: SSR Formula Mesh full set

[ae86]

hey guys for sale is a full set of 15x7.5 -5 ssr formula mesh, been restored, new nuts, been cleaned then powdercoated satin/gloss black and then dish was mirror polished, currently needs a wash since its been raining, great condition compaired to alot of wheels on here, will come with pretty much new eagle f1's i think they are on front ? and tyres on the rear are around 20% so you wouldnt want to keep them for long.
asking $1450
can deliver at your cost max should be 100
pm for details

http://www.ae86drivingclub.com.au/dcimages/3/8/16708.jpg
http://www.ae86drivingclub.com.au/dcimages/3/8/2528.jpg
http://www.ae86drivingclub.com.au/dcimages/3/8/2527.jpg

[sprint86]

+1 for sexy wheels, i wish i had some coin!

[ROLL3R]

These has uuuber dish, can you show a pic of the back of the rim?

[ae86]

come on guys comes with 4 tyres... their ready to rock just need to put them on your car and your off.

[Greasy]

nice.
I have the exact same wheels, except mine arent as shiney :)
btw: they are ssr 'reverse' mesh not 'formula' mesh; as formula mesh have stepped dish.

[Rip it]

If I could be 100% sure these will clear my brakes I will have them. PM me I wanna talk business!!!

[xero]

Hey mate,
Can you please post contact details, I'm interested in your wheels.

[little-cherri]

why sell they look prime on your car!

[DRFTR86]

ill give ya 1450 pesos dave, and 100 pesos delivery, sound good hahaha

on a serious note, r u all there, y sell up man

[ae86]

haha bro i was putting 500 pesos bills into the pokies machienes last nite and i didnt realise so i started tilting em, started rukkus against security for a good 20 mins was mad fun, well i was planning on going wider and lower again, going to get primal to molest my guards to fit wider rims was thinking along the lines of 8's @ front with 0 offset then 9 @ rears with -10 offset or more ? i need to cut up my guards now when i get a wheel alignment cause its scrubbing and i need more castor for skids,

[ae86]

If I could be 100% sure these will clear my brakes I will have them. PM me I wanna talk business!!!

what conversion u got ? pretty sure people have cleared rx7 brake conversion with 14's even.. so these should be easy fit for whatever you got, if they dont ur brake conversion is more than likely over stopping power for power your pushin

and PM'ed xero

[little-cherri]

wow big call, cars looking to good to start cutting up. shame,.

[ae86]

i thought my cars a bucket ? from last words u said or sumfin along them lines, come on guys need money for spoolsies and wheels

[little-cherri]

bahaha your mate called it a bucket, i was just agreeing to make him look cool!

[adam]

what conversion u got ? pretty sure people have cleared rx7 brake conversion with 14's even.. so these should be easy fit for whatever you got, if they dont ur brake conversion is more than likely over stopping power for power your pushin

and PM'ed xero

Brake clearance will depend on the wheel's face design. Not sure about your wheels, but both pairs of my SSR meshies didn't clear standard S13 calipers whereas my Hoshinos did.

Your car looks nice with these wheels, but I do see where you're coming from with the sale. All the best with it. :)

[ae86]

yeah but werent yours 7's and pos offset ?

[spio]

As adam has mentioned, brake clearance is not dictated by offset but by face design

[rolla92]

i love ur DP man. so hot!

[ae86]

ah sorry didnt quite understand, in that case maybe it wont, one pair i bought was used with ajps rx7 brake conv, not sure if face is different between formula and reverse mesh, if these are the reverseable theyd be pretty wild switched

[adam]

Yeah, one pair of mine were 7" +5 offset, the other was 8" -4. One was reverse mesh, the other was formula and both had issues.

I'm not saying that yours won't clear, it will really depend on the wheel itself when it was purchased new.

Just to give people an idea, my 15x7 +5 meshies reversed gave me an about -30mm offset.

[ae86]

yeah i dno ppl prob weiry of it fitting now after all the discussion anyway few ppl interested still

[ae86]

3 people have claimed they are genuinely interested for price that its listed as, one guy said he will pay thursday so if you cant beat that stop PMing me dreamer offers and the stories about you getting the money in a few weeks

[Rip it]

3 people have claimed they are genuinely interested for price that its listed as, one guy said he will pay thursday so if you cant beat that stop PMing me dreamer offers and the stories about you getting the money in a few weeks

There is no such thing as genuine interest until you have money in your hands. Did you get my PM?

[AE71GZE]

so i take it these wouldnt fit an s13, due to flat rear side of mesh?
would be interested if they do..

[ae86]

couldnt have seen why they wouldnt when ppl buy superlights or challengers for s13s... but anyway the wheels are sold so dreamers can stop pm'ing me,
cheers.

[blair]

i drew a picture for you man...

http://i36.photobucket.com/albums/e14/lilwinslow/wheels.jpg

[little-cherri]

haha sucha good picture.

[tuff te-72]

werd.

[ae86]

cheers for the picture banksy, now i can sleep at night knowing we have an artist on the forum, however wheels were sold last week, kinda the reason there was no activity in the thread anymore but u seem to bring it back up for the purpose of publicity of your skills in ms paint, good work.

[blair]

To easy man, Happy to help.

[ae86]

woulda been more help if you posted a link to your ride thread labeled as what not to build, but yeah cheers

[jay70]

hey man will you take this drawing as payment for the wheels?
http://profile.ak.facebook.com/object3/351/65/n34112509796_933.jpg

[racsov]

loooooooooooool

[ae86]

yeah sure... prob cost more than ya ke and the fact that u think 165/65 on ma's are stretched u must think these are masssssssssssssssssive, na ur a bit of a joker ay, trade u my mkiii's for ur mums box?

[jay70]

yeh man fukn sik. these 7.5s are way bigger than the 7.5s i had aye

[twentyEight]

i drew a picture for you man...

http://i36.photobucket.com/albums/e14/lilwinslow/wheels.jpg

Inside of a mesh wheel is not flat like the front/outside, there is a hub section like every other wheel on the market that give some clearance for calipers as is not easily seen here (http://i230.photobucket.com/albums/ee203/hachirusto/IMG_0161.jpg) (sorry for shit pic) - same as this example (http://www.serpentautosport.com/images/Wheels/GTA-wheel_back.jpg) (not mesh, but give you an idea of what I mean.)

[blair]

woulda been more help if you posted a link to your ride thread labeled as what not to build, but yeah cheers



About ae86
Location: centrelink
Occupation: doll bludger
Signature:
i <3 people who have power on the internet they make me feel so inferior with threats


the end.

[Rip it]

woulda been more help if you posted a link to your ride thread labeled as what not to build, but yeah cheers

You just made the biggest dick out of youself with that comment. Your fuckin sad.

[tuff te-72]

OH MAD INTERMETZ FIGHTS! ae86 keep giving em hell when are you getting the mk3? lol i wanna see big time, however in an attempt to sound threatening on the internet, i know people who will fuck yous up so.....if.....you....guys like.....dont....ummmmmm........like......stop giving ae86.........shit......i.......will......like..... calll......people.....YEAH!

[ae86]

lol @ te72 school holidays just blew over their cut, dw bout them their fools, blair you have now proved to me that the Homo neanderthalensis still roams this world as you were supposed to be extinct, jay70 you been crawling on your knees looking for 6.5s cause your too poor for something more suitable, rip it your dp is of some poor quality ebay/firesport sticker and your name sounds like your some sick bogan
<3 you all

[jay70]

lol relax bro, you been hitting the roids too hard?

[todd]

this thread is cute.