PDA

View Full Version : i have no idea what im doing



dbr11k
1st November 2014, 03:09 PM
stay tuned

33865

Sprinter Freak
2nd November 2014, 05:39 PM
Take 2! i reckon start simple with this one, get some track time under your belt with a basic set up then work from there :cool:

joeschmo_57
16th November 2014, 02:31 PM
Needs more low

dbr11k
22nd November 2014, 04:48 PM
so what was supposed to be a cheap daily build is turning out the same way they usually do, purchased front 86 coil overs with cusco tops, Koni front and rear shocks, rear springs, built 4ac with 264 cam, shaved head, 100thou oversize pistons all new bearings etc, Mikuni quad carbs off an fj1200 yami. cheap recline-able race seats, t50 box and shaft etc

few more pics cause everyone loves pics, scored it for $100, ae71, auto, minimal rust..
34091
couldn't be bothered fixing the spare wheel well so welded in a flat piece and re covered it with carpet, under body deadened the underside
34092
34093
all hanging panels removed
34094
coat of Toyota supreme white on all the door jams and inner jams/panels
34095
34096
couldn't help my self and pumped the flares out a bit.. had rust in the rear ones anyways
34097
34098
34101
34100
34102
34103
34104
34105
now im up to the stage of stripping the paint off the outer panels, have the roof in primer
34099
34107
petrol that had been in the tank since 2008 lol
34106

rear window is also out, wasn't gunna take it out but lucky i did as some idiot didn't run sealer around the top of the rubber and dirt/water has been sitting around for a long time and its rusted the whole lip out about 2 inches long