hachimaroku
1st March 2015, 09:15 PM
Hey Guys Selling the motor out of my 86 to fund another setup. Located in Western Suburbs of Brisbane.
Running motor serviced before every track day. Rebuilt 3 matsuri's ago. Not in the car anymore so unfortunately i can no longer start it up for the sake of selling it.
Details are
Bigport 16v 4AGE
20v Quad throttle bodies and T3 ITB adaptor
272 degree no brand cams
HKS timing gears and belt (one of the gears has the anodising or whatever it is rubbing off for some reason)
Head has been slightly ported
Gilmer driven water pump and alternator pulley
AE82 remote thermostat cooling setup
RWD engine mounts
Golden Eagle Vacuum manifold block will be with it as well
TRD copy extractors with v band flange
4agze Crank Angle Sensor to replace the Distributor (also have 2 of them if you wanna swap back)
Exedy H/D clutch and slightly lightened flywheel
Has sandwich plates to run oil Filter relocation and oil cooler. will come with oil lines but no cooler
ECU is a LT10s microtech and X4 ignitor running Bosch External Coilpacks
Comes with Digidash and cable
Looking around $2000 ono for it all together, not really keen to sell seperately but if it comes to that I will.
Also have a complete 7A-FE motor that is not running, but will have most of what you need to build a good bottom end.
Forged conrods will come with it, as well as another spare bottom end thats missing crank caps. Also has RWD engine mounts.
Looking for about $500 for all of that.
Located in Darra
Contact by Text preferably on 0423 644 715
http://i.imgur.com/fAtxpY5.jpg
http://i.imgur.com/0Jus10H.jpg
http://i.imgur.com/0uFhPjB.jpg
http://i.imgur.com/HcNzRZA.jpg
http://i.imgur.com/8D3xxTM.jpg
http://i.imgur.com/aaMGCy3.jpg
http://i.imgur.com/fsEdTid.jpg
http://i.imgur.com/9YuEHbw.jpg
Running motor serviced before every track day. Rebuilt 3 matsuri's ago. Not in the car anymore so unfortunately i can no longer start it up for the sake of selling it.
Details are
Bigport 16v 4AGE
20v Quad throttle bodies and T3 ITB adaptor
272 degree no brand cams
HKS timing gears and belt (one of the gears has the anodising or whatever it is rubbing off for some reason)
Head has been slightly ported
Gilmer driven water pump and alternator pulley
AE82 remote thermostat cooling setup
RWD engine mounts
Golden Eagle Vacuum manifold block will be with it as well
TRD copy extractors with v band flange
4agze Crank Angle Sensor to replace the Distributor (also have 2 of them if you wanna swap back)
Exedy H/D clutch and slightly lightened flywheel
Has sandwich plates to run oil Filter relocation and oil cooler. will come with oil lines but no cooler
ECU is a LT10s microtech and X4 ignitor running Bosch External Coilpacks
Comes with Digidash and cable
Looking around $2000 ono for it all together, not really keen to sell seperately but if it comes to that I will.
Also have a complete 7A-FE motor that is not running, but will have most of what you need to build a good bottom end.
Forged conrods will come with it, as well as another spare bottom end thats missing crank caps. Also has RWD engine mounts.
Looking for about $500 for all of that.
Located in Darra
Contact by Text preferably on 0423 644 715
http://i.imgur.com/fAtxpY5.jpg
http://i.imgur.com/0Jus10H.jpg
http://i.imgur.com/0uFhPjB.jpg
http://i.imgur.com/HcNzRZA.jpg
http://i.imgur.com/8D3xxTM.jpg
http://i.imgur.com/aaMGCy3.jpg
http://i.imgur.com/fsEdTid.jpg
http://i.imgur.com/9YuEHbw.jpg