rallysprinter
26th March 2015, 10:05 PM
For sale:
Microtech MT8 ECU, with hand controller, instruction manual, engine loom - disconnected straight off a bigport 4AGE with standard inlet manifold. Currently tuned to run with 288 cams, but has also been tuned for standard cams in the past.
3495334954
$600 plus postage.
1 set of 4 Hypatec brand pistons in standard size to suit 4AGE 16v smallport engine.
Comes with chrome rings, pins and clips. New in box, only opened for examination.
20mm pin, compression height 30.5mm +1.5mm
I bought these a couple of years ago and I've been told these are now no longer available to buy new.
http://www.ae86drivingclub.com.au/forums/attachment.php?attachmentid=33896&d=1415186245&thumb=1 (http://www.ae86drivingclub.com.au/forums/attachment.php?attachmentid=33896&d=1415186245)http://www.ae86drivingclub.com.au/forums/attachment.php?attachmentid=33897&d=1415186247&thumb=1 (http://www.ae86drivingclub.com.au/forums/attachment.php?attachmentid=33897&d=1415186247)
If you don't know what a hypatec piston is, from Wikipedia: "Hypereutectic pistons are stronger than more common cast aluminum pistons and used in many high performance applications. They are not as strong as forged pistons, but are much lower cost due to being cast."
$200 plus postage.
1 TRD 4AGE 0.5mm Headgasket - Part number 1115-AE824
Was sold to me to suit 16V but I'm not convinced.
$100 plus postage.
http://www.ae86drivingclub.com.au/forums/attachment.php?attachmentid=33895&d=1415186243&thumb=1 (http://www.ae86drivingclub.com.au/forums/attachment.php?attachmentid=33895&d=1415186243)
I've now got some forged pistons and will be using a standard height head gasket, so these are surplus to requirements.
Parts in Hobart, Tas but happy to post Aus wide at buyers cost. Any questions, let me know.
Craig
0419 four 31 nine 93
Microtech MT8 ECU, with hand controller, instruction manual, engine loom - disconnected straight off a bigport 4AGE with standard inlet manifold. Currently tuned to run with 288 cams, but has also been tuned for standard cams in the past.
3495334954
$600 plus postage.
1 set of 4 Hypatec brand pistons in standard size to suit 4AGE 16v smallport engine.
Comes with chrome rings, pins and clips. New in box, only opened for examination.
20mm pin, compression height 30.5mm +1.5mm
I bought these a couple of years ago and I've been told these are now no longer available to buy new.
http://www.ae86drivingclub.com.au/forums/attachment.php?attachmentid=33896&d=1415186245&thumb=1 (http://www.ae86drivingclub.com.au/forums/attachment.php?attachmentid=33896&d=1415186245)http://www.ae86drivingclub.com.au/forums/attachment.php?attachmentid=33897&d=1415186247&thumb=1 (http://www.ae86drivingclub.com.au/forums/attachment.php?attachmentid=33897&d=1415186247)
If you don't know what a hypatec piston is, from Wikipedia: "Hypereutectic pistons are stronger than more common cast aluminum pistons and used in many high performance applications. They are not as strong as forged pistons, but are much lower cost due to being cast."
$200 plus postage.
1 TRD 4AGE 0.5mm Headgasket - Part number 1115-AE824
Was sold to me to suit 16V but I'm not convinced.
$100 plus postage.
http://www.ae86drivingclub.com.au/forums/attachment.php?attachmentid=33895&d=1415186243&thumb=1 (http://www.ae86drivingclub.com.au/forums/attachment.php?attachmentid=33895&d=1415186243)
I've now got some forged pistons and will be using a standard height head gasket, so these are surplus to requirements.
Parts in Hobart, Tas but happy to post Aus wide at buyers cost. Any questions, let me know.
Craig
0419 four 31 nine 93