4age 16v female ecu connector

[ke70+ae92]

hey all
Just had a look online but couldn't find anything, would anyone know where to get 4age ecu female connectors,
I've got a aftermarket ecu for my ae92 but I don't want to cut the harness so if I could make a adapter loom, it would be heaps better.

Thanks all!!

[Skylar]

http://www.diyautotune.com/catalog/diybob-breakout-adapter-nippondenso-42-pin-p-414.html
OR
http://www.diyautotune.com/catalog/diybob-breakout-adapter-nippondenso-52-pin-p-413.html

I dunno which connector you have but it'll be one of those two. I'd think AE92 is the 52 pin?

Link used to sell them too. I was gonna buy one from them but I cracked the shits being impatient and unsoldered one out of an ECU I blew up. Wolf sold them at one point too.

[tottacrolla]

If you want to make a neat adaptor loom with near oem reliability you can use the module as posted above, plug your original loom into one side of the module and then straighten out the pins on the other side of the module. All you do then is get some oem loom plugs from a breaker and these push on the straightened pins opposite your loom plugs.
The blank loom plug pins go to your new ecu pins.
It's a good plug in solution without needing to solder directly to the pins.
I used a connector module from an old ecu that I bought cheaply, just cut the pins where they are soldered to the board.

[ke70+ae92]

I just checked my one out its a 54pin ecu it has a 12pin plug, a 16pin and A 26pin plug

[Matt]

Try anthony from kaizen garage. He used to make adapter looms back in the day.