Jimmee1990
7th May 2015, 11:20 PM
I've been collecting parts for a little while to build an awesome 16v 4A-GE but plans have changed and I've changed direction. Everything is ONO, but I have researched pricing pretty thoroughly so I really doubt you'll find it cheaper elsewhere. All parts are new and un-used unless stated. Will discuss further discounts if you buy a few things or everything also. Best to contact me on either 0448 076 716, I might not answer as I work odd hours so send me a text if I don't pick up. Otherwise email me on james@autosurplus.com.au.
CP pistons to suit 82mm bore, 12:1 compression. These come as a complete kit with pistons, steel rings, heavy duty pins and circlips. Part number SC7654. $650.
ARP head stud kit, this is the revised version with the smaller diameter and shorter stud under the distributor for clearance for oil flow and distributor clearance. Part number 203-4203. $180.
ARP main stud kit, part number 203-5403. $140.
Tomei main cap ladders. Also need the ARP main studs to be used, as standard bolts are too short. $150.
Supertech Formula Atlantic intake and exhaust valves. Intakes are 1.5mm over-size and exhausts are 2mm over-size. Part numbers TIVN-1020 and TEVN-1020. Selling as a set at this stage. $300.
ACL race series conrod bearings, -0.25mm under-size. $55.
ACL race series main bearings, -0.25mm under-size. $82.
TRD Carrillo Formula Atlantic conrods. Have been used for a very limited amount of dyno time when I purchased them, and have since been re-sized, new bolts fitted and custom small end bushes made to take 20mm floating pins (FA used 19mm pins). $600.
I can post anything very cheaply, as I have a Star Track account and payment is to be via bank transfer or cash only.
CP pistons to suit 82mm bore, 12:1 compression. These come as a complete kit with pistons, steel rings, heavy duty pins and circlips. Part number SC7654. $650.
ARP head stud kit, this is the revised version with the smaller diameter and shorter stud under the distributor for clearance for oil flow and distributor clearance. Part number 203-4203. $180.
ARP main stud kit, part number 203-5403. $140.
Tomei main cap ladders. Also need the ARP main studs to be used, as standard bolts are too short. $150.
Supertech Formula Atlantic intake and exhaust valves. Intakes are 1.5mm over-size and exhausts are 2mm over-size. Part numbers TIVN-1020 and TEVN-1020. Selling as a set at this stage. $300.
ACL race series conrod bearings, -0.25mm under-size. $55.
ACL race series main bearings, -0.25mm under-size. $82.
TRD Carrillo Formula Atlantic conrods. Have been used for a very limited amount of dyno time when I purchased them, and have since been re-sized, new bolts fitted and custom small end bushes made to take 20mm floating pins (FA used 19mm pins). $600.
I can post anything very cheaply, as I have a Star Track account and payment is to be via bank transfer or cash only.