My Hollaback Girl

[blake.]

my ae71

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/18125.jpg

updated 23.1.11

engine:
ae92 smallport mild port and shaved head
jdm rwd cooling system
cut n' shut manifold
trd copy exhaust manifold
2.25" exhaust system with one muffler
hektic pod

suspention:
front:
ae86 struts with weld on coilover kit
8kg springs
trd blue 4-way adjustable shocks
tein strut tops
26mm swaybar
t3 rose jointed tie rod ends
t3 steering arms
rear:
ajps springs 215mm free hight 6kg
koni adjustable shocks
custom adjustable panhard rod
17mm whiteline adjustable swaybar

driveline:
stock t50
std clutch
jap tailshaft
jdm t-series small axle disk rear end
2way lsd

brakes:
front:
jdm calipers reconditioned
vented disks
decent pads
rear:
jdm calipers
slotted disks
unknown pads
braided brake lines

interior:
nardi classic, worn
swift gti seats
sony head deck
fusion 5x7

exterior:
buffed paint
new tail lights

wheels:
13x7 hotwires set (fitted)
14x6 datsun sunny rims pair
14x6 jdm ae86 factory options pair

[shift_rook]

mega clean, hope that drift accident wasn't to bad

[ke_70]

how much must of cost a fortune i like!

[blake.]

thanks shift rook,



just a small hole in the bumber, very small dint just under the left taillight nd smash indicator,


fixed the taillight alraedy tho.

[blake.]

ke70: cost me $3000 from "evan"

[Prewer]

nice clean car, sure you didnt pay too much?

[blake.]

Prewer:

now i think of it i might hav but o'well

i rly wanted one nd dad would let me buy one in shit condition

[ROLL3R]

GEEZ thats heaps $$$$$$!! These days ae71's go for so much !!!!!. I picked mine up about 4 years ago. A stock Ae71 spirit manual mint condition owned by a gay guy. Payed $1400 with 6 months rego and a roadworth cert.
Goodluck with the build. what sort of suspension modifications are you planning to do?

[blake.]

ROLL3R:

i forgot to mention suspention,

i have lowered king springs in the back( not low enough tho) and no naame shocks,

i cant puy new shocks for the frount cost noone stocks them so i might be getting coilovers. just wot ever is cheap.

[Prewer]

^^ your not trying very hard if you cant get standard shocks.. Repco mate, or some of the sponsers on here

[blake.]

here pics of the after math of me playing bumper cars :)

stupid fiesta

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/18128.jpg

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/18129.jpg

only just hit him :(

[blake.]

tail light is fixed btw. replace it with a new one last night :)

[ROLL3R]

are you sure they dont stock the ae71 front shock inserts, i work at repco, i've never checked but it sounds strange that no one would stock them, though i would recommend using different struts as there are alot of other after market parts available.
Yeah and "low" king springs suck balls, they barely lower it more then the sagged orignal springs did. though king springs can custom make you a pair, though they are pricey.

[Prewer]

^^ im at Repco also, 482 Launceston, theres a listing there, but they are standard Monroe ones.

King springs are gay, You can get springs from Lovels, but be expected to wait 4 weeks for them to be made.

The only way is shortened shocks and DIY coilovers if your on a cheap budget

[blake.]

i went to wholesale suspention nd sum other places nd thay were saying there discontioued.

so yer im thinkin coilovers,


thanks for you imput guys

[ROLL3R]

Just go ra60 struts if you are going to do coilovers, also i recommend using corona lower control arms to correct the camber. Hey prewer maybe i'll MR some shock inserts from your store ha ha!

[blake.]

thankss m8

[blake.]

app. the cheapest quote that guy could get for his shitbox was $1300, then i rightfuly told him to go fuck himself,

[ROLL3R]

lessen learnt. Dont drift into other peoples cars ! drift into a tree insted !!!!!

[Prewer]

^^ tree's have feelings too..

[ROLL3R]

But a tree doesnt ask you for $1300 after you hit it :yeah:

[Prewer]

Most tree's arent rip off's like that certain tree!

this threads golden

[ROLL3R]

Money doesnt grow on tree's ya know ! :rolleyes:

[blake.]

roll3r: i wish it did :(

[blake.]

got new tyres today, perelli's. might help stop me from crashing.

also got a bad exaust leak :(
hating the 4a-c's lack of power, cant wait for 4age time :D

[VTAZ!]

my 4ac Guns u must have a nugget spec one!

[Prewer]

^^ baha, call

[stahlz_ae86]

Maybe once the 4A-GE is in you can be more sideways and faster next time and write the little shitbox off and your car too while you're at it? It's sad to see this thing is already damaged.

[blake.]

taillight is fixed,
will get crome bumpers when i learn to drive properly lol

[ROLL3R]

Use your money to upgrade a suspension or braking part of your car b4 you spend money on looks. your car will thank you for it, it may even make you shit ya self if you treat it nice ha ha

[blake.]

ha ha, yer thats the plan:)

it going to be handeling and brakes,
then POWAR,
then looks :p

[ROLL3R]

and a nice set of wide wheels, that shouldnt fit !!! and then you build your car around the wheels...... or maybe thats just how i build cars :D

[15LIDE]

pretty nice looking car, haha dont complain about ur lackof powah with a 4ac,thinkabout us poor guys wth 4k's :P,
always go suspension mods first!
wat rims are you planning on getting?

[ROLL3R]

get some fat 13 inch rims !!! 13's are the shitastic !!

[blake.]

yer wot roll3r sayed, either fat 13's or fat 14's

thinking reverse meshies or wanatabies

[ROLL3R]

superlites are easily available and realitively cheap.

[blake.]

i like cheap.

[joeschmo_57]

i like cheap.

you and every other rolla owner

[Prewer]

i like cheap.


and i like your mum and she's cheap..

[blake.]

and i like your mum and she's cheap..

your not the first to me me that

[joeschmo_57]

meh

you pay for what you get.

[blake.]

the exaust just snapped off just after the trans, sounds hektic, lol.

hopefully in5-6 weeks i'll have the 4age in :)

[ROLL3R]

:unseen: What do you do to your ae71 for the exhaust to snap off ?? :shocked:

[blake.]

leave it liek that, lol.

[45KIDS]

Don't worry bout a 4age yet! Put all that money into suspension parts! If you already crashed once. Im gunna hate to see you try drive a completely standard ae71 with a 4age :s

[blake.]

lol, yer, i gots new tyres now nd i cant slide or spin em witch is good

[ROLL3R]

What size tyres did you get ? and brand ?

[blake.]

wotever size the stock 13's are :)

they're pirellis p3000.

coned mum into buying them for me saying they'll make me safer.

[ArbPotatoes]

Lack of 4AC power?

QUAD CAAAARBS :P

You gonna upgrade the front brakes before you put that 4AGE in?

[blake.]

yes i'm looking for jdm srpinter hubs and brakes.

not much luck finding any for sale in sydney tho.

[corknose]

http://www.ae86drivingclub.com.au/forums/showthread.php?t=8145

gotta use ya noggin if u want good parts

[blake.]

thanks mate i'll have to give him a call,

[blake.]

washed her.

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/19618.jpg

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/19619.jpg

i didn't know the rims were that shiny, lol.

[Sherlock]

Preeeeeetty

[ke_70]

aha hektic zorst tip lol
na came up awesome i do want!!!!

[blake.]

fully aye,

nd i it pretty to :)

[ke70 xx]

Definately some charcoal wantanabees. Look so good on red cars. Thats what im going to go with I reckon. And definately do suspension before a 4age. Soon as I got my going with 4age I already had some decent suspension parts so that made it all the better :)

[blake.]

charcoal wantanabes would deffo look good on it,


i getting jdm ae86 brakes,hubs etc, on the weekend (anyone know if my 13's will still fit over them?) and then coilovers in the front as i already got the rears done.

then 4age time :D

[blake.]

got new rims...

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/19848.jpg

they need a polish and new tyres.
i need longer studs to fit them to.


also bought jdm ae86 front brakes, going to reseal them before they go in to.


i need to save for rego now :(

[sonsta]

if you use the right wheel nuts u should be able to use the standard studs. i have a pair of wheels identical to yours that i use as skidders

[blake.]

i was thinking that, any chance you can show me a pic of the wheel nuts your running?

[corknose]

http://media.photobucket.com/image/toyota%20wheel%20nuts/112ecosse/Ebay%20images/IMAG0002.jpg

i run something like that

[blake.]

thanks :), i'll be making a trip to mr bob janes this weekend

[Eddy]

http://www.valiantspares.com.au/images/categories/RIMG0161.JPG

there the type of nuts you need for those wheels, not longer studs, you have to make sure you get ones that are narrow enuff so they slot into the wheel as you can get different sized holes.

[blake.]

my brother bought a ae92 sx, and replaced the 4age with a 4agze the next day, and he gave me the 4age. apparently its been rebuilt but i'll be put ing a lighty ported head, 0.8mm headgasket, and big port cams.


pics up soon

[Sherlock]

FREE 4AGE! Loving it.

[a0wwllan__]

thats a clean ae71 dude..

keep up the good work. Will skim through this thread more in the future to see the progress =]

[spilmer]

the csx rims looks nicer than hotwires, car looks fantastic in the first pics.

[blake.]

thanks guys, i need to put up more pics, and spilmer as for the hot wires, they're just skidders for when the 4a goes in.


btw guys, im selling a air-con setup, pwr-stearing pump and lines, and few other things from the 4age, just remember its all fwd. all cheap to. :)

[blake.]

got new bearings in the hubs, getting a seal kit for them and hopefully they will be in this weekend.


engine has been stripped and head off, going to put a ported head on with a thinner headgaskit. also in the middle of cutin and shutin the manifold.


anyone know wot headgaskit would be better? 0.8 or 0.5?
looking at the ported head i think it has been shaved so how much of a differce will this affect my head gaskit choice?


pics this weekend.

[blake.]

yay pics!!!11!

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/22440.jpg

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/22441.jpg


the engine:
http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/22442.jpg

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/22443.jpg


ready to be welded:
http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/22444.jpg


reco one on the left and on thr right is the one i pulled off. one on the right might be for sale son.:
http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/22445.jpg


can anyone tell me if the pistons are standard? im certain they are but my brothe thinks otherwise:
http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/22446.jpg


at the mucle car masters today i saw this strut brace, might copy nd use the rose joints.
http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/22447.jpg



my bro's car:
http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/22448.jpg
its got:
4agze halfcut, rebuit with pulley upgrade and no intercooler. very hot.
fullysunroof, lightweight rims, slotted rotors in front.
its quite fast.

[blake.]

i'm in mascot this week and had my car parked inthe street and it started to hail :(
got minor scratches all over now, she be getting a polish this weekend

[blake.]

getting a new clutch tomorow,
just took the gearbox out, wot a cunt that wwas to do.

my brothe welded up the manifold today to.

pics tomorow.

[blake.]

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/547523.jpg

the manifold



http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/23112.jpg

new clutch yo

[blake.]

bought new wheel nuts for the hotwires, $77 with a discount, sadface.


also got the paint stripped of the wheels ready to paint tonight then polish.
i'll get tyres for them next weekend then they finally go on :)

[blake.]

bought seats from pen15 today, they're from a swift gti wth modifided rolla rails.

heres a pic for ya's
http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/24968.jpg

selling the old seats if anyone is interested.

[corknose]

They look nice in the car , I rember when they were w
in his car they were comfy

[blake.]

they look great aye, i'm loving them.

just sits aa bit high but i'll get over it :)

[blake.]

bought black top itb today pic this weekend :)

[blake.]

got jdm ae86 brakes going in this weekend,

and will start putting the 4age back together,


need rwd shit liek alternator brackets and water pump to ppl, plz pm me if you have anything in sydney :)

[blake.]

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/547764.jpg

cut a coil off the front. now sits sortta even with the back :)

[corknose]

now cut 4 more off haha

[blake.]

i was thinking that, mayby this weekend ;)

[blake.]

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/547830.jpg
got this.


http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/27688.jpg
and these.


i need new shocks (trd greens) people, can anyone help me out?

[Evan]

This cars sick!
i miss it
sell it back??
haha

[blake.]

its getting there aye evan,

nar sorry man i love it to much :)


when its done i'll let you have a drive of it aye.

you spirit is sick too

[pen15]

looking good get some nice interior pics i wanna see these new seats lol

[blake.]

haha yer i will, just need to clean it up a bit first :)

[blake.]

got the coilovers together thanks to steroidchickens. they'll be going in tonight along with the brakes, will get some pictures, nd will clean up the interior for some pics of the seats :)

[blake.]

got them in :) pictures tonight,

[markKE70]

this car looks heaps clean keep up the good work mate

[blake.]

Pictures!

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/29606.jpg

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/29607.jpg

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/29608.jpg

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/29609.jpg

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/29610.jpg

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/29611.jpg

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/29612.jpg

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/29613.jpg

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/29614.jpg
Black Top ITB's

[blake.]

i'll all derpressed now.

hit a gutter bent sum shit, to depressed to have a good look, think i buckled a rim.

i'll take it to a wheel aliners tomorow to see how bad shit is.

[pen15]

take me some pics ill tell you rails go really easy on rollas but if your keen sell me your black top quads lol looks good in the pics mate

[ke_70]

lucky the rims are worth $15
did you hit the front or back

[blake.]

i think its just the tie rod bent cos the toe is out quite alot, i'm hopein i havent hurt the hub,

i hit it on the front going forward.

it wasnt the stockies ethier, it was my hotwires (pics of them on soon).


and pen15, i'm wanting to do the same as you with the quads, but if money comes tight you'll be the first i offer them to :)

[blake.]

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/549007.jpg


its been lowered since this picture but i got the stockies on the front as i poped a tyre hitting the gutter.

will get more pictures when i can be bothered getting more tyres.


got a rwd water pump and alternator ajustor bracket new from toyota but having a few issues with them :(

[sleeperketo70]

gutters suck hey bro but never mind every has done it. looking good man will look so much better low done and with abit of camber.

[blake.]

my birthday today!!


got new tyres yesterday nd lowerd the back a bit. stands a lot better now.


also i got a gift voucher to project d's drift school and a advanced drivers course. both should be very interesting :)

[joeschmo_57]

at least you only bent hotwires and not some good rims.

are you taking your car to the drift school?

clean car btw

[blake.]

hey man i love my hotwwires :p

dad wont let me weld my diff so it will be pointless using my car.
i'll just use theirs.

thankx btw

[Instigator]

Easy solution to that problem is to get another diff for hot swappable weldie goodness ;)

Nice clean 71 man, haven't seen you round Penrith though. I usually harass every 70/71 owner I see at lights and in traffic :P

Does your mum drive this at all? If so, I think I might of tried to talk to her at the lights off the M4 not long ago and got snubbed :hehe:

[blake.]

yer mate i wanna get a t-18 diff with some sort of lsd but i dont has any money.

i dont know how you havent seen me cos i drive heaps. where bouts you from?
and mum doesnt know how to drive manual lol :)

[Jacobxxx]

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/29607.jpg

how fucking ghetto is your neighborhood, tag on the house window/door thing hahah

[blake.]

HAHAHAHAHA nar thats at my mates house,

pics of my hood in the first page :)

[blake.]

got caught doin a skid, impounded for 3 months :(

http://www.facebook.com/photo.php?pid=1012000&l=c090262bab&id=1554357028

[keimeier]

spewing dude

[pen15]

a first offense this should not have happened

[shift_rook]

fuuuu, sucks to hear man, shithouse

[ke_70]

fuck! harsh! why so long? did you end up in the cop shop its self?????

[MR 86]

Soo how good was the skid ??

Sorry to hear mate

[86TRD]

holy shit that sucks, cop must have been having a bad day and took it out all on you.
thats going to cost a fair bit in keeping it in the impounds.

[blake.]

ok so there is a chance of me getting this back on tuesday as "its dads car ;)" and the 3 points & $506 fine has turned into going to court instead.

this is the best week :)

fucking real shit consitering it was my first offence as pen15 sed.

if i do get it back tuesday i will start the 4age convertion :D

[ke_70]

so what where you actually doing that you got in so much trouble?

[blake.]

a small slide as a u-turn in a culdersac

[corknose]

aka sitting on brake in the local strip?

[blake.]

so i get this back tomorow. when its home i'll take the engine out if i can be bothered.

[shift_rook]

excellent to hear! will be good to see some progress

[blake.]

yer aye i'm just thinkin fuck it now nd go all out putin the 4age in.

btw ppl wot accelrator cable can i use?

[pen15]

jdm sprinter that's what i use might as well build it correct use the correct bits

[Instigator]

JDMYO! :DD

Shouldn't be too hard to get the K motor out, took me 4 hours to get my 4AGE out the first time I ever took a spanner to the bay.

Lemme know if you need a hand or get stuck.

[blake.]

4ac yo mate :)

i'll let you know if i need help :)

[blake.]

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/549760.jpg

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/44549.jpg

:)

[R&D Mechanical]

Looking good mate :)

[blake.]

thanks, still a lil bit to go tho.

[blake.]

so i won $450, might buy t3 tie rod ends and ps arms

[70rolla]

hey man how hard was it to put those seats in

[blake.]

for me they bolted straight in, bought them off pen15 who bought them off someone else.

they appear to be top half of a swift and bottom half corolla, cut and weld job.

[Evan]

Good to see man

[blake.]

almost done the convertion. just exaust + airbox to go.


in a desperate need of a wheel alinment. i got t3 tie rod ends and steering arms, think i might needs longer tie rods for them tho..

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/53417.jpg

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/53418.jpg

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/53419.jpg

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/53420.jpg


http://www.youtube.com/watch?v=JTcenonTNSk


http://www.youtube.com/watch?v=O7rdU8AZbR0

[blake.]

yes i know its not loww enough.

[joeschmo_57]

winner. now all you need is some JDM stickers and you can be a true dwifter.

but seriously fucking awesome.

[spiderman]

Hotwire <3
Looking good mate

[pen15]

not bad are you going to be hitting some drift days now?

[blake.]

joeschmo_57, thanks mate.

spiderman, i love hotwires to.

pen15, i would hope so, but i'm not good at 'drifting' also the clutch i have in it wont lett me brake traction as it just slips.



so i'm going to be saving for a better clutch and a t-series :)

[keimeier]

sweet nice work mate

[blake.]

droped it off at the exhaust shop this morning. pick it up tuesday arvo then i'll wheel alighn it on wednesday arvo.

will be ready for toyotafest :)

[pen15]

hey mate dont get a t series they just cost so much money and keep fucking up lock your borgie and skid it power steering arms and lock spacer is all you need and a good clutch pick up some skills and then when you need to start to upgrade over time it will save you money i would know my car has cost me a fortune lol keep up the good work reminds me of when i started doing this to m car when i got her

[blake.]

yer i'm kinda copying your car lol.

dad wont let me lock the borgie as i us the car to drive to work everyday.
i got t3 arms and lock spacer already, going to look into a clutch soon.

what diff could people suggest to me then? r31?
i'd just want somthing i can put a cheap lsd in, and retains the 114.3x4 stud pattern.

[pen15]

F series but they are way to heavy for your setup well looks like your stuck for the moment find yourself a t series cheap and lsd that bitch

[blake.]

got it back from the exhaust shop today. it is mad fun to drive :)

wheel anighning tomorow :)

[Instigator]

I should be building mine in a few months I'll let you know what it ends up costing me once it's finished. 28 spline VL/R31 converted to 4x114.3 :pinchme:

*edit something like this -

http://www.ae86drivingclub.com.au/forums/showthread.php/15202-rebuilt-r31-28-spline-4.11-mini-spooled-diff-converted-to-suit-ke-ae

or this

http://www.ae86drivingclub.com.au/forums/showthread.php/7788-Diff-R31-with-KE-AE-mounts-Minispool-3.7-ratio

[corknose]

Shiftrook is selling his t series 500 with corona brakes.

[stahlz_ae86]

To me yeah, waiting for him to pull it out of the car.

[R&D Mechanical]

With the r31 diff you can use toyota studs but you have to redrill the stud holes to 14mm on the dot to fit. as nissan use pissant studs and a shit thread

[pen15]

r31 diffs fail so hard f series are so much better the handbrake cables fit diff center is central 2wayt options are easy brake upgrades are better

but blake seriously if you are going to be an na boy get a t series if you are going turbo get an f series

[Instigator]

VL/31 diffs have been proven performers behind big hp motors for years now, they're cheap and they're everywhere. My mate MILF's VL pulled 400+hp at the treads for several years with RB30/25DET head combo, 10.7 quarter mile, and even more than that now with the blown V8. Still running the factory LSD just tightened up. R31s 28 splines actually have 2mms greater axle spline diameter than an F series.

You boys going to Toyofest? Meetup?

[blake.]

still thinking bout the diff, so many options.

also on another note, went to toyotafest, meet golberg, he's a mad cunt and i love his car, won a bottle of oil in the raffle :)

and finally....
got done on the way there for speeding :( for 20+kms/h could be loosing my licence for 6 months as im on my greens and was double demerits.

if i do loose it then when i'm driving age this agen it will have quads, cams, computer and some sort of diff :)

[Andyy]

what ended up happening with ur license man?

[blake.]

payed the fine on friday, now waiting on a letter.

[blake.]

so today i put down a deposit for a diff,

next weekend this should have a t series disk read end with a 2 way :)

[corknose]

i love my diff(same thing).

so nice when you go to full lock to do u turn and give it a bit just locks so easy.

[blake.]

i'm pretty excited for it but sexy16 sayed i might have to tone down my driving a lil till i get used to it.

[joeschmo_57]

yeah. try to learn slowly before the mistakes happen.

or else it will be gutter/tree/laws of physics - 1, You - 0

[Instigator]

Good stuff bro, come take me for a "spin" when you get it in :D

[70rolla]

could be a spin out my friend wild driver this one

hows the liscence thing going blakeos

[blake.]

wat?


and so far no letter from them. i might be keeping it?

[blake.]

some news,

i'm lossing my licence for 3 months.

and i killed my diff, apparently the borgie dont like 5 grand dumps, snaped axle and dammaged center.
had to drive it home for 40kms with all this loud banging noises.



good news tho, i got the 2 way t series, disk rear end.

will put up specs of diff later.

[Gunner]

what a shit box...











Oh shit did I post that out loud? :)) haha

Good shit blake.

[Blaike]

hahahah smashing down fragar road into school zone.phat car bro

[joeschmo_57]

5 grand dumps wouldn't have killed the diff so badly if you weren't stationary........

Good shit man.

[blake.]

thanks gunner :)


blaike thats why i'm loosing my licence.


joe yer was trying to kill it.





Specs of diff:

t series small axle
unknown 2way
braided brakelines
unknown pads with slotted rotors.
noathaine swaybar bushes
super pro trailing arm bushes.
t series tailshaft.


i love it.

[SEXY 16]

So do I lol

[lolwat]

looking good man, my 4 age should be going in soon =D

[joeschmo_57]

how much better is it to drive hard?

[blake.]

So do I lol
haha i bet you do, i'll call you later bout the strut brace on greenboys car.



how much better is it to drive hard?
heaps better, kicks out in the dry and stays there rather that flickin back like with a open diff.
i cant describe how much fun it is in the wet tho.

also does perfect circles as a person who recently posted in this thread showed me.

over all i wouldnt change this setup for anything else.

[Gunner]

not even for super fun happy times?

[blake.]

not even for super fun happy times, i would trade it for an unfinished ej powered ae86 tho.

[Instigator]

Come take me for a spin Takumi :P

[pen15]

paul told me you had some fun with this keep it up and pics needed

[lolwat]

pics pics pics

[blake.]

Come take me for a spin Takumi :P
message me nd i'll come round, i lost your number nd everytime i go past you aint home :(



paul told me you had some fun with this keep it up and pics needed
paul had fun in this, and agen this arvo when i went round there. fuck hes a mad driver.
i'm still 'learning' how to drive this but i getting there.



and what ya's want pics of? you all seen a diff. but i do have new "burnout/drift" tyres and rims.
pics of them and of the car this weekend maybe.




also on the market for new coilovers as my stubaxle hate me cos i ade it kiss a gutter twice and i dont have suitable shocks.

[blake.]

oh and hopefully some trackdays soon as i lose my licence in 5 days so i wont need it as a daily.

wonder wwat it'll run on the quarted and dyno ?

[lolwat]

awww i was going to say meet in peno its raining but i didint realise you have no licence :(

track that shit :)

[blake.]

i sdtill got a licence for 5 more days :)

meet where?
is yours finished?

[joeschmo_57]

lose of license = take car off the road and turn into a gang mobile

[lolwat]

nah mines still 4 K POWER!!!!!!!!!!!!! hahahha

[blake.]

lose of license = take car off the road and turn into a gang mobile

gang mobile?
i'm instantly thinking of the bus on the warriors.


nah mines still 4 K POWER!!!!!!!!!!!!! hahahha
wwere bout do you live? i wanna cheack it out :)

[lolwat]

andromeda drive you cant miss it, you drive down the road and see the BALLANess, cut springs with steelies (down near Vincent raod)

[lolwat]

i wonna ckeck out your pedal box and clutch master too (for when i drill mine)

[blake.]

i'll pop round now .

[lolwat]

no problems

[lolwat]

good to meet you, defs cruse once i got 4 age, pretty sure you took the wrong car home too:rolleyes::DD
cars balla

[SEXY 16]

Come over tomorrow evening lol

[Instigator]

Friday night cruise/meetup?

[blake.]

Friday night cruise/meetup?

call or message me on 0422700602 nd we will :)

lolwat feel free to come if yaa think you can keep up wwith the two 4ages :p

[lolwat]

pfft 4 ages, 6 grand in first gear 4k you will fuked

yea i might

[lolwat]

sexy16 matt informed me you have a cross member for me, ill be keen for cruise fuk it why not

[blake.]

come with me to pick it up.

[lolwat]

cheers heaps for the tail shaft =D

[blake.]

got an update.

replaced the crappy 10inch thermo fan for a monster 14inch one. displaces so much air and dosent get to high temps now.

looking at running a ae92 sx oil cooler setup aswell as i want to start trackin this.



pictures tonight or tomorow.

[lolwat]

thermo fan is fukin huge
PICS!!!

[blake.]

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/551457.jpg
crap picture of the diff. but you can tell its a t-series :)

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/60313.jpg
engine bay atm

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/60314.jpg
the bigger thermo on the left, supercheap special.

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/60315.jpg
how it currently sits.




i'm looking at a strut brace for the front and my brothe will be making me one for the rear(simmilar to a ajps weld in)

[lolwat]

whats your bro do for a living, seems to do all your welding and that

[Gunner]

looking good dude, bolt ya handbrake cable up. :))

[blake.]

my brother is a boiler maker/fabricator.
i think why bother learning to weld when a pro can do it for free :)

that hanbrake cable has nowhere to bolt up to. different to a ae86?
in saying that i aam haaving hanbrake problems.
seems very tight, only goes up one or to clicks, i think on the drivers side it drags.
wwhen performing a handbrake manuver it doesnt lock, on the occasion tho the drivers sside will lock tho.
when parking on a hill the handbrake wwont hold the car and i have to leave in gear.

i think maybe the caliper need rebuilding as paul(sexy16) told me it sat for about a year with the handbrake up


anyone have any other ideas?

[70rolla]

Matt no's a lot about this problem I remember Him saying that cal had slotted rotors on his tseries and because of this fuck up with the cable it made one side go smooth lol but yer talk to Matt he knows and I think that's why he went hydro cause he kept having trouble with his cable set up

[blake.]

just pm'ed him then

[blake.]

bought a oil cooler today, just need to find the sandwhich plate i have somewhere to fit it up.


also while i have lost my licence i'm going to redo my fuel system with a surge tank.
as what i thought was the clutch slipping i now think is fuel surge, but i still will be getting a better clutch.


i have also been informed that my handbrake problem point towards the cables so i will be getting rid of them and getting a hydro.

[pen15]

nice have you seen mine its by far the best way to do it and as for clutch my old one from my 4age is for sale its wicked and has a nice light flywheel ++ there

[blake.]

yer i saw that but i not sure if i want a lightwieght flywheel tho, i'll call you now.

[Instigator]

You do :yeah:

[blake.]

but matt just convinced me to put my quads on with cams and a haltec :/

[pen15]

yeah flywheel aswell lol

[blake.]

i'm only a apprentice so we'll see how funds roll.

plus mum is really startin to get the shits with me spending money on this aye.

[lolwat]

tell her theres atleast something to show for it compared to, booze,pokies or gambling it
and what size cams you going??? some big?? =D

[joeschmo_57]

wow. your wheels have more dish than i intitially thought
ITBS and cams will make this car awesomely complete. tell your mum that she doesnt know how happy this car makes you and then slam a door n shit

[blake.]

tell her theres atleast something to show for it compared to, booze,pokies or gambling it
and what size cams you going??? some big?? =D

not sure yet, probs same as wat you sold matt.



wow. your wheels have more dish than i intitially thought
ITBS and cams will make this car awesomely complete. tell your mum that she doesnt know how happy this car makes you and then slam a door n shit

yet the wheels are deciving, all i want is to hear the sound of the itbs. i already have aa set of blacktob quads so i getting there.





in other depressing news, alongside lossing my licence and other major personal issues, i have lost my job, so the (little) money has stopped.

lost it purely because i lost my licence. was thinking about giving my boss a left handed handshake. but i did do a skid in the workshop on the waay out tho.


fuck you denlo volkswagen.

[lolwat]

badluck man, hope you find something soon, let us know if you need a hand with anything

[blake.]

put the ajps rca's i've had laying around in just for somthing to do.

and put on a pair of standard jdm sprinter rims, shit offset but i'll get some spacers. need another pair for the rear. just for somthing different than the hotwires for a bit.
i'll put the hotwires back on soon tho.

i also found both my lca ball joints are fucked and drivers wheel bearing in on its way out. the front ssetup is givving me the shits on how shit it is, it understeers like a cunt.


pics when i find the cammera

[ke_70]

angry skids ftw!

[lolwat]

should of seen the mad skid into his street WOW, i thought he was fucked when he got it out, let alone when he held it and it flicked the other way, that shit was intense(looked balla)

hey thought of a awesome idea, i park my car at yours(with box, Xmember and 4 age in the back) come back in say 1-2 weeks and drive it away 4age powered =D, good idea??? sweet cheers :jdmsmile:

[blake.]

that would be a good idea but my driveway is on a slaant and waas fucked for my convertion, tho yours is flat ;)
ind i cant do wiring for shit.

[lolwat]

mine is flat but were i would crane it in, its on a slant :( (car port isnt high enough)

ill get someone to wire it jsut bolt everything in =D (nah i really wont to do it hahah) your help is always welcome though:jdmsmile:

[blake.]

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/551472.jpg

http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/60514.jpg

mounted. there is 4 vertical brackets, (two at the back, two at the front), to stop it from moving as i travel thorugh time.

[blair]

Paint the brackets black to make it less homejob spec ;)

Looking good though man, if it doesn't keep your motor cool there then something is seriously wrong! :-)

[blake.]

yer i gotta take it off to put the hoses on so i'll be doing it then.

[blair]

Good to hear, should end up pretty stealth man.

[joeschmo_57]

that is very un-assuming. awesome work bro unit

[lolwat]

is that just like an auto cooler???, boss said i can have his old on from his cuda(like brand new) looks identical but bigger(more rows), would be mad if i can run that

[blake.]

sure is.

[lolwat]

fuk oath, sweet as, looks good man, pretty sure im going to mount mine the same way hahaha, what hosing you using?

[blake.]

just the shit that came with it, black oil resistant rubber hose, i need more tho.

[lolwat]

tell me a size and ill get it from work(ill buy a role ill need to do mine too)

[blake.]

got big swaybars from beau's car today.

rear:
http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/61141.jpg


front:
http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/61142.jpg



had some problems fitting up the front one tho, as it waass hitting the strut (WTF) rang beau, he didnt know, nd i tried askein matt seeing as he as a insane ke but we didnt know what was happening.

jacked up:
http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/61143.jpghttp://www.ae86drivingclub.com.au/dcimages/2/7/8/6/61144.jpg

on the ground:
http://www.ae86drivingclub.com.au/dcimages/2/7/8/6/61145.jpghttp://www.ae86drivingclub.com.au/dcimages/2/7/8/6/61146.jpg



i've come to the conclusion that the swaybar needs to be pulled over to the passenger side bout half an inch and it will be right, but it will be close. i think corona lca's might fix it tho.

[Beau]

I dont know if this has anything to do with it. But did you notice on the driver side of your OG sway bars is a different shape to the other side.

You think that has something to do with it?

You have straight rails?

im so confused by this

[blake.]

do you mean on the original sway bar were the bush goees in longer on one side than the other? i just noticed that then in the picuture.
does anyone know if that would make a differance?


what do you mean by straight rails?



i just drove it round the block, has zero body roll in the front and a tiny bit in the rear :)
more importantly i didnt hear any knocks in the front from the swaybar hitting the strut so maybe it could be ok, just looks weird.

[Beau]

Nah i ment the general shape of the sway bar. It doesnt seem to be sysmetrical like my old one is. If you dig? Look at the two front bends, different radius bends it seems.

If its working in your car, then dont worry and just mack sluts!

[blake.]

i "dig".

yer now that i drove it i aint really worried anyomore.


you were right to, feels awesome.

[lolwat]

believe it was quoted" best 200 bucks spent" ill have to add them to my list now :D

[blake.]

updated first post.

[lolwat]

http://www.nissansilvia.com/forums/index.php?showtopic=475136

[blake.]

i'm down for that. you going to be ready for it?

[blake.]

oh and today i got the sandwich plate for the oil cooler, cost me $20 :)

i just soaking it in degreaser atm, i'll fit it up wwith picturess sometime during the week.

[lolwat]

well im boring i didnt take any pics while engine was coming out mikes got them on his phone, i didint take any before Xmember and shit went back in so no build thread =D

and pretty sure ill go and get one of those plates :)

[lolwat]

any updates or what XD
you coming for emotional support this weekend lol

(oooyea kick in the balls 17 bucks a metre EFI gates fuel hose :/ 70 bucks worth)

[blake.]

oil cooler ssetug is half done, i got lazy.

worst day ever, have bdo yesterday nd felt fucked all day.


yer i'll be there, just message me when yaa need the ssupport.

[lolwat]

i got fuking trashed yesterday in the city was pretty good from what i remember, i got starter motor bolts coming from samQ as well as a lock spacer :) and hopfully bell housing bolts off him too(if not the bell housing ones ill get some), rack bushes are coming tomorrow after i make a phone call :)(was meant to have them already), got rack boots, need to find a way to sutho matt has found my clutch fork and has my G box member from cal,got my gold plated fuel line today (4 metres) and these P clip thing to hold the line should be able to run my pump power wire though them aswell , i need to have a chat to my boss about the engine crane, and my dad is already making the "thought it was going to be an easy quick swap over" comments so soon it will be winging and shit,

/ends rant

[blake.]

we can get all thaat shit done saturday.

[lolwat]

cant get shit done i need parts hahah, i got Samq to post the stuff off express doubt it will come before weekend

[blake.]

i currently got a 4.3 ratio in me diff now, and i have a ra40 auto center with a 4.11 ratio.


would it be worth going to the 4.11 ratio? i want to but if i do i would want to change all the bearings and reshim the lsd?
anyone got the part numbers on the bearings and shims of a t-series small axle

[JDMWheels]

Hey mate,

Awesome build :)

What size are the swaybars that you got from beau ?

[lolwat]

What size are the swaybars that you got from beau ?
fuking BIG!

[JDMWheels]

fuking BIG!

Haha... I figured that :)

[lolwat]

im curious myself i might try and measure them next time i see his car

[JDMWheels]

Thanks mate :)

[86TRD]

Why would you want to go for 4.11's, id think it would make it to slugish for a 4a.

[Instigator]

I'm pretty sure I've got 4.11s and it goes OK, I don't really drift though.

Any pics or vids from twilight?

[Beau]

What size are the swaybars that you got from beau ?

26mm front 17mm rear

[n2866]

keep 4.3s thats good 4.1 not as good for sliding these