seabiscuit
7th March 2016, 11:31 AM
SOLD SOLD SOLD SOLD SOLD
Bought this car a few years ago, with the intention of swapping out the busted up 4AGE 16V to the 20V. I got as far as putting it in, and thinking about wiring before progress halted. The engine has not been run for over 5 years, but was bought as a runner with 89kw at the front wheels using a microtech. As I'm in need of cash, this would be easier to make money by parting out, but I'd be very happy to sell the car as a whole. Probably looking at $2800 for everything, and $2000 without the rimmies.
Phone number: 0424-240-649.
NSW Engineered for fuel cell, 4age, brakes, exaust, etc. (not engineered for coilovers) so if you decided to road-register this, it would be possible to tidy up and pass inspection.
20V silvertop. Probably has everything to work in RWD incl SamQ water stuff. $800
Microtech LT8 $350
T50, worked well when I drove the car with the 16V, $300
standard rear diff, should stay with car to make moving easier
Exhaust:
has a set of extractors with the car
at least 2.5inch exhaust with cat resonator and pretty quiet muffler
$150
Fuel system:
big custom fuel cell in boot.
boot has flat floor so no spare.
vl pump.
body:
109xxxkm on clock atm., shell is rust-free and straight as. Re-do the clear/repaint and this would be an excellent shell.
gaurds are all standard.
$750 for engineered shell. suit track shell (due to fuel tank), or registerable if completed and inspected.
Wheels MK II, 14x7.5JJ -6 very very good, only 1 has small nick, $600, 14x6.5JJ +12, good condition, small nick in one $300. Both pairs just need a clean/hand polish. $800 for the set. Both pairs have cheapy diamondback rubber with good tread.
suspension:
front- AJPS coilovers with axle braces.
Brakes: jdm ae86 vented front brakes with braided lines
8kg king springs
koni adjustable shocks
cusco camber tops.
just jap strut brace.
Tanabe big sway bar. (something like 24mm)
ttt rca's
ke70 lcas
ae86 power steering arms
new wheel bearings
rear- tein 6kg springs
tien 32way adjustable shocks.
Tanabe 18mm swaybar
ajps pan hard rod (on car adjustable)
For ALL suspension, I'm after $1500
Front package $1200
Struts/brakes $850
Rear springs/shocks $150
Panhard, $100
Swaybars, $150 each
Interior:
Was mint when I bought it, but now dash has started cracking in the standard spots. Upholstery is fantastic. Front seats are in another car, but are available if looking to buy the interior. They are super soft, plump and comfy. $450 for all of interior. $350 for all seats.
dish steering wheel $50
tacho dash $80
This is what it was like when I bought it in 2011: OLD SALE THREAD (http://www.ae86drivingclub.com.au/forums/showthread.php/66669-minty-ke70-16v-with-looow-k-s-loadsa-goodies)
(http://www.ae86drivingclub.com.au/forums/showthread.php/66669-minty-ke70-16v-with-looow-k-s-loadsa-goodies)
MORE PICS TO COME:
http://i.imgur.com/TojmrP9h.jpg
http://i.imgur.com/3WyoCaFh.jpg
http://i.imgur.com/Btsn7T3h.jpg
http://i.imgur.com/ihFyE2Lh.jpg
http://i.imgur.com/dDF7Wr9h.jpg
http://i.imgur.com/5JNzYhmh.jpg
Bought this car a few years ago, with the intention of swapping out the busted up 4AGE 16V to the 20V. I got as far as putting it in, and thinking about wiring before progress halted. The engine has not been run for over 5 years, but was bought as a runner with 89kw at the front wheels using a microtech. As I'm in need of cash, this would be easier to make money by parting out, but I'd be very happy to sell the car as a whole. Probably looking at $2800 for everything, and $2000 without the rimmies.
Phone number: 0424-240-649.
NSW Engineered for fuel cell, 4age, brakes, exaust, etc. (not engineered for coilovers) so if you decided to road-register this, it would be possible to tidy up and pass inspection.
20V silvertop. Probably has everything to work in RWD incl SamQ water stuff. $800
Microtech LT8 $350
T50, worked well when I drove the car with the 16V, $300
standard rear diff, should stay with car to make moving easier
Exhaust:
has a set of extractors with the car
at least 2.5inch exhaust with cat resonator and pretty quiet muffler
$150
Fuel system:
big custom fuel cell in boot.
boot has flat floor so no spare.
vl pump.
body:
109xxxkm on clock atm., shell is rust-free and straight as. Re-do the clear/repaint and this would be an excellent shell.
gaurds are all standard.
$750 for engineered shell. suit track shell (due to fuel tank), or registerable if completed and inspected.
Wheels MK II, 14x7.5JJ -6 very very good, only 1 has small nick, $600, 14x6.5JJ +12, good condition, small nick in one $300. Both pairs just need a clean/hand polish. $800 for the set. Both pairs have cheapy diamondback rubber with good tread.
suspension:
front- AJPS coilovers with axle braces.
Brakes: jdm ae86 vented front brakes with braided lines
8kg king springs
koni adjustable shocks
cusco camber tops.
just jap strut brace.
Tanabe big sway bar. (something like 24mm)
ttt rca's
ke70 lcas
ae86 power steering arms
new wheel bearings
rear- tein 6kg springs
tien 32way adjustable shocks.
Tanabe 18mm swaybar
ajps pan hard rod (on car adjustable)
For ALL suspension, I'm after $1500
Front package $1200
Struts/brakes $850
Rear springs/shocks $150
Panhard, $100
Swaybars, $150 each
Interior:
Was mint when I bought it, but now dash has started cracking in the standard spots. Upholstery is fantastic. Front seats are in another car, but are available if looking to buy the interior. They are super soft, plump and comfy. $450 for all of interior. $350 for all seats.
dish steering wheel $50
tacho dash $80
This is what it was like when I bought it in 2011: OLD SALE THREAD (http://www.ae86drivingclub.com.au/forums/showthread.php/66669-minty-ke70-16v-with-looow-k-s-loadsa-goodies)
(http://www.ae86drivingclub.com.au/forums/showthread.php/66669-minty-ke70-16v-with-looow-k-s-loadsa-goodies)
MORE PICS TO COME:
http://i.imgur.com/TojmrP9h.jpg
http://i.imgur.com/3WyoCaFh.jpg
http://i.imgur.com/Btsn7T3h.jpg
http://i.imgur.com/ihFyE2Lh.jpg
http://i.imgur.com/dDF7Wr9h.jpg
http://i.imgur.com/5JNzYhmh.jpg