pmed =]
bolt in t-series for your ke/ae
ok i have 2 diffs this is to clarify what i have and how much
1.complete s1 t-series drum to drum with locked center no whines wheel cylinders done recently and front seal done 800kms ago
(has handbrake cables)
2.s1 t-series housing bare but has a center sitting in it in imac condition with 3.9's in it
3.fully balanced and rebuilt including the bearing jdm tailshaft
cost
1.400
2.150
3.SOLD
as topic states i have a new diff in my ride so this old t-series from a s1 t-18 has to go
it has a welded center and sway-bar mounts welded onto it i had the front pinion seal done by diff technicks there is no whining and runs well i have only done about 5000kms on it myself but goes really well
location is Sutherland shire Sydney pickup only
contact through pm
need this shit gone asap but pretty firm on price
Last edited by pen15; 17th November 2009 at 11:11 PM.
the dyno pull to 300rwkw
BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less
pmed =]
dose
bump is any1 keen on a t series bolt in for their rolla / sprinter
the dyno pull to 300rwkw
BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less
i would be but im about to give all my cash to you for the seat.
My AE86 the long build : http://www.ae86drivingclub.com.au/fo...ead.php?t=8965 < the new rebirth of Wolverine starting from page 41.
Need Tyres? PM me, most brands in stock!
Need a Mechanic? Injector cleaning, brake and flywheel machining, custom made brake lines soft and hard, block and head decking, custom made exhausts, wheel alignments, suspension work. PM me Located 40min south of Newcastle.
How much did the rebuilding of the tailshaft cost you?
I really want to get a T series for the red baby because I'm sick of wheelspin, but I want a disc LSD.
still keen on tailshaft Mat =]
oh and whats in your car now?...
dose
ok before i decide to sell shit separate or post
tailshaft will sell for around $250
and diff well i will decide cost later
might keep the axles
the dyno pull to 300rwkw
BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less
bump up
the dyno pull to 300rwkw
BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less
bump it up may come with some techno pro spirit 4.3 ratios as im getting some 4.7's
this is a good upgrade for your 4age ke70 or whatever may be keen on posting at buyers expense
the dyno pull to 300rwkw
BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less
4.3 is great for daily/skid some one buy good diff good welds.
Originally Posted by biggo
Posting Permissions
