this seems like a great idea. price seems abit steep. but when you think about dont have to pay for struts and they have an rca.
i have had a couple of sets of hsds ion the past and they have been great.
not trying to sell anything here.
copied and pasted
After a long time in R&D (couple of years actually) we are proud to release the new HSD **-type coilover kit for AE86 Sprinter, Trueno, Levin and equivalent Toyota chassis numbers.
This is a true bolt-in kit, with all the best stuff for this model.
The front units feature and inverted mono-tube damper, with a special offset pillow-ball camber plate that also gives a caster increase.
The inverted damper means you have a thick top shaft for maximum strength and reduced unsprung weight. A complete stub-axle is included, with roll-centre adapters and longer bolts under the unit to reduce bump-steer. As the damper is inverted the adjuster is hidden inside the base, so for easy adjustment an extended adjustment knob is included, with a stay to keep it out of harm's way. Like all HSD **-type coilovers, the height adjustment is made at the base of the unit and there is a slot cut in the side so you can easily see how much lower or higher you can go.
The rear features adjustable-length mono-tube dampers with 15-step damping adjustment, plus an adjustable spring seat and new short spring. As this kit is designed for drift and race AE86 cars the included spring rates are 8kg front and 6kg rear. Any rate can be swapped into the front, but at this stage 6kg is the only rate for the rear. More rates will be available according to demand.
Due to the complexity of the kit the price is a little higher than other **-type kits at $1899, but this is still miles cheaper than equivalent kits from Japan.
Go to the ** page to order your set now!
![]()