Page 1 of 4 1 2 3 4 LastLast
Results 1 to 10 of 34

Thread: VIC: Come and have a geeeze!!!

  1. #1
    Veteran hachi_dk's Avatar
    Join Date
    Mar 2009
    Name
    Filip
    State
    VIC
    Location
    Jozzaville
    Country
    Australia
    Posts
    1,069

    Default UPDATED! check the specials!!!

    ALL OFFERS CONSIDERED.
    PM ME.
    NEED TO GET RID OF THIS!!!


    special!
    $100 for the 6kg 200m free height AJPS springs.
    be quick!


    hi guys, i will be doing each of the items on special starting with the 6kg springs! the next item to go on special will be the LEVIN guards!
    cheers guys!!!

    - location is Vic - western suburbs

    - contact by pm please

    - will post at buyers expense

    - feel free to ask any questions.

    1. extreme 200mm bigport HD 4 puck clutch with pressure plate and thrust bearing
    - brand new
    - $350


    4. JVC head unit
    - condition is fully sik
    - pulled out of my 86, worked well
    - $100


    5. AJPS 6kg 200mm free height front springs
    - good condition, couple paint chips
    - $100!!!


    7. interior trim head deck surround?
    - near new condition
    - $40


    8. T series zenki flange with open centre and 4.1 CW + P
    - VGC crown wheel and pinion, pulled out of a low km t-18
    - $200 - can supply spare centre welded or still open for an extra $50


    9. 270mm chopped springs out of some car?
    - stiff, around 4-5kg?
    - $50


    10. WELDED zenki centre
    - good condition, use to pass roady or weld up and rip some skids with a locker
    - $50 - CENTRE HAS BEEN WELDED


    11. AE86 panhard rod
    - good condition with near new bushes
    - $50


    12. 2x sets of AE86 LCA's.
    - ball joints roll smooth, bushes in good condition.
    - $50 a set - $80 POSTED FOR BOTH!!!


    15. catalytic converter, have been told its a "high flow"
    - 2.25 inch? in and out
    - good condition, not "punched in"
    - $100


    17. ADM rear bumper with brackets in white on black panda
    - VGC condition
    - $100


    18. AE86 caster kit
    - good condition, one side has a slight bend
    - $50


    19. 300mm free height springs
    - clear your defects
    - $50


    20. AE86 FRONT 21mm sway bar
    - good condition
    - $100


    21. Excel G short stroke inserts
    - great condition, no leaks
    - $200


    22. Kouki welded centre (no CW)
    - locker fun for all you late model (big axle) diff users
    - about 1kg of slag in it
    - $100


    24. Front right and left LEVIN guards
    - good condition
    - minor dents
    - $150




    ADM washer bottle and overflow thingy

    $60 posted


    Willans 4 point harness

    $200 posted, can come with free black pug


    JDM? passenger seat with rails in great condition. no marks or rips



    - silvertop quad throttles with gasket!
    $275 posted anywhere in AUS.

    - "Monroe originals" rear ae86 shocks in great condition - no leaks
    $75 posted anywhere in AUS.






    Thank you for looking!
    Last edited by hachi_dk; 8th February 2010 at 01:39 PM.

  2. #2
    Veteran 86TRD's Avatar
    Join Date
    May 2009
    Name
    Luke
    State
    NSW
    Location
    Forster
    Country
    Australia
    Posts
    2,280

    Default

    dont happen to wanna sell the brackets that are bolted to the head unit do you? if you will ill take them.

  3. #3
    Veteran hachi_dk's Avatar
    Join Date
    Mar 2009
    Name
    Filip
    State
    VIC
    Location
    Jozzaville
    Country
    Australia
    Posts
    1,069

    Default

    there yours for $20 posted
    i'll pm you bank details.

    -coily sleeves SOLD PP
    -JDM callipers, backing plates and disks SOLD PP

  4. #4
    Member
    Join Date
    Jun 2009
    Name
    Senan
    State
    VIC
    Location
    Blackburn South
    Country
    Australia
    Posts
    81

    Default

    sparco genuine?

  5. #5
    Veteran hachi_dk's Avatar
    Join Date
    Mar 2009
    Name
    Filip
    State
    VIC
    Location
    Jozzaville
    Country
    Australia
    Posts
    1,069

    Default

    yes siree

    edit: will seperate rail and turn seat into a computer chair if rail is sold alone

  6. #6
    Member jy086's Avatar
    Join Date
    Dec 2008
    Name
    John
    State
    Victoria
    Location
    Nunawading
    Country
    Australia
    Posts
    97

    Default

    hi there, any noise on the zenki diff? if not i'll take it. thanks

  7. #7
    Veteran keiichi's Avatar
    Join Date
    Dec 2008
    Name
    Zac
    State
    QLD
    Location
    Sunnybanku
    Country
    Australia
    Posts
    1,903

    Default

    do those sleeves come with upper spring perches with undrilled pilot hole?
    what suburb?

  8. #8
    Veteran hachi_dk's Avatar
    Join Date
    Mar 2009
    Name
    Filip
    State
    VIC
    Location
    Jozzaville
    Country
    Australia
    Posts
    1,069

    Default

    hello, if you are reffering to number 8. then no, no noises.
    i purchased a t-series flange with an LSD and 4.7's so just basically did a straight swap.
    ill pm you bank details?
    let me know.
    cheers mate.
    Last edited by hachi_dk; 31st December 2009 at 02:19 AM.

  9. #9
    Veteran hachi_dk's Avatar
    Join Date
    Mar 2009
    Name
    Filip
    State
    VIC
    Location
    Jozzaville
    Country
    Australia
    Posts
    1,069

    Default

    sorry mate, sleeves are sold PP
    no upper spring perch, just what you see in the photo.
    if that falls through its yours.

    edit: suburb is footscray
    Last edited by hachi_dk; 31st December 2009 at 02:22 AM.

  10. #10
    Veteran hachi_dk's Avatar
    Join Date
    Mar 2009
    Name
    Filip
    State
    VIC
    Location
    Jozzaville
    Country
    Australia
    Posts
    1,069

    Default

    seat - SOLD
    calipers, disks, backing plates - SOLD PP
    4 links - SOLD
    Last edited by hachi_dk; 4th January 2010 at 03:27 PM.

Page 1 of 4 1 2 3 4 LastLast

Similar Threads

  1. [VIC] Beige KE70, 5spd manual, 4k engine, vic reg til march
    By leigh4110 in forum Cars for Sale (Toyota Only)
    Replies: 0
    Last Post: 28th October 2012, 06:49 PM
  2. VIC: 1988 Cefiro, spun bearing, VIC rego, shit load of mods
    By kriss in forum Cars for Sale (Not Toyotas)
    Replies: 2
    Last Post: 13th March 2012, 01:39 PM
  3. [VIC] Bare AE86 struts great for coilover conversion $80 [VIC]
    By stahlz_ae86 in forum Car Parts For Sale
    Replies: 2
    Last Post: 2nd August 2011, 10:34 PM
  4. Fs: Wheels With Big Dish 14x8 - Offset Vic $250ono, VIC
    By ender in forum Car Parts For Sale
    Replies: 4
    Last Post: 7th September 2009, 11:43 PM
  5. WTB: AE71 with VIC rego or VIC RWC
    By keiichi in forum Cars or Parts Wanted
    Replies: 3
    Last Post: 10th July 2007, 08:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •