Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 23

Thread: T diff gears,LSD,welded centres,4a20v bits

  1. #1
    Senior Member shelldrake's Avatar
    Join Date
    Feb 2009
    Name
    Eddie
    State
    VIC
    Location
    Ripponlea
    Country
    Australia
    Posts
    144

    Default T diff gears,LSD,welded centres,4a20v bits

    Ok folks, I'm changing my driveline so I'm getting rid of my t series bits.

    First up,complete centre with 4.5 ratio t series, toyota(trd 2 way from memory), bought gears new from Toyota, LSD was second hand but worked well. Assembled with new bearings less than 2000 kms ago by the diff doctor. Driven on street and for two track days, started to make noises after the second one so I pulled it out. It's still all in good condition but needs the clearance reset. Would also get gears lapped by a diff shop to be safe. $650...

    Next up,drum to drum complete 4.7 ratio t series, welded centre, new bearings. Some minor noise. Good condition. Can be test driven in car. Will turn any n/a sprinter/celica/etc with a t series rear end into a fun, lively car. $600

    welded centre for t series housing. 50 bucks.

    ae86/ae71 t50 gearboxes to suit 4a series motors. came from low km ae71s. Both very good condition.
    $SOLD

    ae86/71 t50 trd short shifter good condition. Love this. Too awesome. $SOLD

    custom extractors for 4a 20v into ta22 celica. Would prolly suit ae86 too. $SOLD

    blacktop throttle bodies with custom spacer plate to suit silvertop head. Port matched. $350

    custom fibreglass airbox with pod filter - to suit 4a 20v blacktop throttle bodies in ta22 celica. $200

    Eddie - 0425 753 776
    Last edited by shelldrake; 13th January 2010 at 05:38 PM.

  2. #2
    Senior Member Drift_Donkey's Avatar
    Join Date
    Aug 2009
    Name
    James
    State
    NSW
    Location
    Byron
    Country
    Australia
    Posts
    344

    Default

    do u have tailshaft to suit the t series into a t50? And wher u located?
    Quote Originally Posted by marvis View Post
    I also like sportmaxx and incorrectly placed/applied hangrings.

  3. #3
    Senior Member .ady's Avatar
    Join Date
    Feb 2009
    Name
    Andy
    State
    VIC
    Location
    Footscray
    Country
    Australia
    Posts
    693

    Default

    i think his located in melbourne
    Quote Originally Posted by KE slider View Post
    yes i did fail she was 14 what u expect(shakes head)
    Quote Originally Posted by todd View Post
    why are u messaging a 14yo asking if u can 'tap that'?
    Quote Originally Posted by calknowles View Post
    cause hes like chaos in the size department.

  4. #4
    Veteran Touge Boy's Avatar
    Join Date
    Mar 2009
    Name
    Ben
    State
    SA
    Location
    Modbury
    Country
    Australia
    Posts
    1,484

    Default

    How much for the TRD Short shifter posted to Adelaide 5092?

  5. #5
    Senior Member shelldrake's Avatar
    Join Date
    Feb 2009
    Name
    Eddie
    State
    VIC
    Location
    Ripponlea
    Country
    Australia
    Posts
    144

    Default

    The tailshaft is a 2 piece to suit a ta22- it is a t series to t50 though.

    Add 15 bucks for postage to Adelaide on the shifter.

    All gear is located in Melbourne.

  6. #6
    Senior Member
    Join Date
    Dec 2008
    Name
    Terry
    State
    QLD
    Location
    Ipswich
    Country
    Australia
    Posts
    436

    Default

    can I pls have a pic of the air-box. thanks

  7. #7
    Member
    Join Date
    Jan 2009
    Name
    Scott
    State
    TAS
    Location
    Hagley
    Country
    Australia
    Posts
    59

    Default

    Hi fella...

    I am interested in the 4.7 diff...

    Freight would be a pain in the arse though...

    What condition is it in, what is causing the whine??

    Would you consider selling the c w &p seperate??..how does $400 posted to Tas sound??

    Regards

    Scott

  8. #8
    Veteran shift_rook's Avatar
    Join Date
    Dec 2008
    Name
    Chris
    State
    VIC
    Location
    SE Burbs
    Country
    Australia
    Posts
    4,719

    Default

    i'll take the weldy man,let me know when i can grab it

  9. #9
    Senior Member shelldrake's Avatar
    Join Date
    Feb 2009
    Name
    Eddie
    State
    VIC
    Location
    Ripponlea
    Country
    Australia
    Posts
    144

    Default

    Will post some pics tomorrow night of airbox and parts.

    The 4.7 is in good condition. I bought it about 2500 kms ago from a guy who bought the gears news new from toyota and used them for about 3 track meets. They have had a soft high pitched whine on decel since I've had them. I inspected them when I bought them and they looked brand new. I have confidence in them. Would be happy to strip them and send to you if required.

    By "Weldy", you mean the lone centre yeah? Will you be picking it up? Give me a call or pm.

  10. #10
    Senior Member JDM-086's Avatar
    Join Date
    Dec 2008
    Name
    Dario
    State
    VIC
    Location
    Melb
    Country
    Australia
    Posts
    511

    Default

    2way sounds tempting. so still in good nick u say? how much for the 2 way on its own.

    also is it for zenki or kouki

Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. Kaaz LSD + 4.77 diff gears query
    By schmitt in forum Technical - Questions
    Replies: 1
    Last Post: 9th March 2011, 07:46 PM
  2. ae86 suspenion / diff / lsd / body bits etc
    By Evan in forum Car Parts For Sale
    Replies: 22
    Last Post: 27th May 2009, 02:00 PM
  3. T Series Kouki Diff Centres
    By ke25 race in forum Car Parts For Sale
    Replies: 0
    Last Post: 18th March 2009, 09:41 PM
  4. LSD centres, can you put them in adm diffs?
    By adsrx in forum Technical - Questions
    Replies: 12
    Last Post: 19th May 2007, 12:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •