Reply With Quotewd40 and lots of twisting and turning! be persistent, it will come off after time. i has the same problem with my old wheel.
Remove AW11 Steering wheel
Want to fit a aftermarket boss kit and steering wheel, however the
original AW11 steering wheel very hard to pull out after 17"mm centre nuts removed.
Is there any tricky way?
Thank you very much!
wd40 and lots of twisting and turning! be persistent, it will come off after time. i has the same problem with my old wheel.
What Tim said^. I think you can buy a special steering wheel removing tool from your local Supercheap Auto. I've never used one before so I don't know how good they are.
Remember not to completely remove the nut in the centre! leave it sitting on the shaft by a few threads...that way it won't fly off and smash you in your face when you're yanking on it.
Cool, I will try.
yea you can buy a steering wheel puller from super cheap , Ive got one and it works well to crack then nut and then you just unscrew it once its cracked
Rust is a way of life
cant say ive ever had a stuck steering wheel. even in my ke70 that would of never come off before
i pushed and pulled from the top and bottom for some reason it never budges from the sides. and theres no risk of hitting your self either this way
wd40 the shit out of it
leave nut on the end so you dont smack yourself in the face
sit in the seat and use arms and knees to pull on it.
comes off eventually.
Yep. Also you can do that and have someone hit the nut.
Steering wheel come off finally, repeat using WD-40 for serval days, and finally pulled out.
Thx for everyone!
patience is a virtue!
Posting Permissions
-