TRD & JDM Suspension Setup, race bearings & Gaskets

[haydenz]

Hey all,

So I have changed to coilovers and all this stuff is out is ready to be sold.....

This is how low the car sat before taking out the setup:




1. JDM front strut setup
This came from my JDM half cut 1 1/2 years ago and was a really good grippy setup for street. A great upgrade from standard and complete swap over.
-JDM struts......great condition...everything is straigh, well they are cool because they are JDM yo!
- TRD sport springs.....unsure on spring rate, I would say between 4-6kgs as a rough guess. Lower than standard, not to low to scrub
- TRD/tokico shocks......these are still in great condition, no leaks and have been a very comfortable shock to run. They are 5 way adjustable awesome for twisties/dwift and very stable.




$400 picked up at this stage

2. Rear TRD motorsport springs
- 6kg spring rating
- 210mm free height
- Great condition



$180 posted Aus wide

3. TRD Blue 8 way adjustable rear shock absorbers
- Dirty and greasy
- Needs new bottom bushes and preferably to be rebuilt



$110 posted Aus wide

4. JDM ae86 LCA & steering arm set
- I changed to xt130 control arms and ps arms so no need for these.
- Again came off my JDM half cut
- Bushes are in really good condition as well as ball joints
- Both dead straight, no bends
$110 posted aus wide

5. Nolathane LCA bush kit
- Ordered 2 sets so this is brand new in the packaging.
- Suit ae86 LCA or xt130 lca



$35 posted aus wide

I will do Arms & these for $130 posted aust wide if anyone is interested

6. 4age SMALLPORT/20v ACL Race series Conrod bearings & Assorted Gaskets
- Suit smallport engine or 20v engine
- One test fitted but rest of them are still in plastic wrapping.
- paint scratched off that bearing



- Gaskets include
- Multi layer head gasket
- Intake
- Water pump
- O2 sensor
- Water outlet/inlet

$100 posted aus wide for both

6. JDM shifter
- Went to short shifter
- I think they are heavier than ADM ones
- Great condition
$50 posted Aus wide

Located in Geelong, Victoria

Everything can be posted but will have to quote up prices for bigger stuff

Chuck me offers aswell as I will chop prices if everything is brought quickly or multiple stuff is brought.

P'm me on here or contact my mobile 0431536236

Thanks Hayden

[ae86 slide]

Hey mate, what brand head gasket? What thickness aswell?

Cheers

[haydenz]

To be honest I am not sure on the brand/thickness aswell.....My mechanic brought it when we were rebuilding the engine, but I brought a metal gasket instead. I will take a picture of it & see if I can get a measurement on it.

Cheers

[Frak]

Front springs are 2.8kg

[ae86 slide]

No that's cool mate, I'm chasing a metal gasket aswell.

[73ta22]

would you pull the shock out and send me just the shocks and springs from the front struts? (i'll just throw them in my ADM struts; im thinking the strut itself would be too pricy on postage).

If so, best price for: front shocks, springs, rear springs and LCA bushes, all posted to 4556 (Sunshine Coast, QLD)?

Cheers mate,