Hey all i got mew doors and im switching the interior colour over. Iv gotten it all off except for the window winding thing is holding it on.
Just wontering is there a proper tool or do you just pull it off.
Cheers
there is a proper tool and there is also the search function, someone asked this last week...
there is a circlip holding the winder on to the spline, its halfway down the shaft on the back of the winder. just use a flathead screwdriver to unclip it, just make sure you don't lose it.
yeah just stick the screw driver in there and turn the winder
you play halo?
add me GT: samnbhnc
proper tools are not expensive, and it can be tricky with a screw driver, also ive been informed u can use an old rag to get in off
Rhonda the F20c powered Panelvan
http://www.ae86drivingclub.com.au/fo...20c-powered-E7
those clips are called "jesus f**king christ" clips because when they come flying off towards your left eye, thats usually what you say as you dive for cover.
and yes, the rag way works, takes bout 4 seconds to get em off
all window wonders are the same, sept some falcons, as they hav a screw
Rhonda the F20c powered Panelvan
http://www.ae86drivingclub.com.au/fo...20c-powered-E7
I quite like the special tool, it's only $8 or so anyway
My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts
- SQ Engineering on facebook -
Please e-mail to contact me instead of sending a private message on here.
when you put the cip back ithave it facing so that when you need to get it off again the side you need to jamm the too or screw driver in isnt the same pace as the handle