Would i be able to fit 15x10 -26 on the rears? -flared stock guards.
Hey guys,
Well im ordering some wheels tomorow, and i need to know how low of an offset i can go on the rears befor they will hit my suspension..
Im getting some 15x10's in either -12 or -26
I rather -12 as they wont poke out as much as the -26's, but will the inside of the wheel clear my suspension on a 10" wide wheel?
Kindest Regards, BlueLevin.
Last edited by BlueLevin; 25th November 2010 at 07:12 PM.
For AE86?
On mine they cleared by a mile.
Member of the Cable-Tie Cartel.
Yeah its for an ae86, sweet. Thanks for the help
Another question...
does anyone think that i would be able to fit 15x10 -26 wheels with 195/50 tyres under ridiculously flared stock guards (not bolt ons)? -with a fair amount of poke.
The car is sitting at 100mm off the ground, just legal.
Last edited by BlueLevin; 25th November 2010 at 07:12 PM.
Not without looking rediculous. My -12's still had a fair amount of poke with rather large all metal flares.
Roll the -12's with either a 205/50 ro 195/50, make em fit under the guards.
Member of the Cable-Tie Cartel.
if its around 100mm off the ground, i honestly wouldnt bother gettting wheels that will poke. just cant make it look right i reckon.
^^ Will look silly. Why have it so high if you are going to rock wheels like that?
I'm pretty happy at they hieght its at. and i actually think it looks pretty hot with poke where its at, any lower dude and it will scrubb like madness.
At the moment im running 15x8.5 -8 reversed meshies... poke and fitment = sex, so thats what im after..
How it sits at the moment:
The look im going for is somthing like JDM Garage's Ae86 (which most of you would know of), just with stock falred guards:
But yeah, given the specs on that ^ -12 should come out enough i guess.
Last edited by BlueLevin; 26th November 2010 at 05:29 PM.
It'll look just fine bro. I actually have a pair of 15x10 -12 super lites on the rear of my 86 with 205x50 (planning to go around 195x45 when it's much lower) and it's a little higher than yours. I get nothing but compliments though. But I'm telling you, flare them as much as the fuckers will go, because they're going to scrub hard.
why bother keeping it legal height if you're having such wheels? may aswell go the whole hog, you'll get defected anyway asnd yeah x10 with stock guards looks pretty gross, you have to understand the amount of work that went into bretts guards, not the sorta thing you can just do with a maglite
Posting Permissions
Reply With Quote
