The cam doctor cams

[PHAT86]

Hey guys just wanted your opinion

What are your views on cams getting custom made from the cam doctor for my 4AGE?

I can get these at a good price, have looked at HKS, tomei or toda but the price they want for the specs i want

is just out the budget, i have already purchaed HKS cam gears and HKS valve springs to go with the new cams

Any helps would be great. Cheers Allan

[Sam-Q]

what specs do you want? I might have another option

[PHAT86]

265 duration both exhaust & inlet with 8.5mm lift

[roadsailing]

why bother with such small duration? have you driven any cars with cammed up 4AGEs? worst thing you can do is go too small because of imagined drivability problems.

[Slimer86]

My honest opinion, is to go with tried and tested companies, Toda, HKS, Tomei or TRD.
They are expensive in comparison due to R&D and testing costs.
Manufacturing quality is second to none, and guaranteed to work, even to the cam timing specs which may need a minor tweak to suit your engine.

Save coin, do it once, do it right.

[blair]

There are other companies with off the shelf options. Wade and crower I think both do a few different sizes? I'm sure there are more just have to look harder.

[xero]

kelford and camtech both do that duration and lift.

[pen15]

camtech i would not trust but kelford hells yeah cheap as chips and they are good i know from experience on another note i run second hand hks shafts they work very well if i where you go a good brand of cam wait a little longer till you have the coin if your going to spend a lot of money on a motor you might as well get the good parts

[Sam-Q]

You know you don't have to buy Japanese to get something good. I know of a proven vvt compatiable 270/270 combo but it's higher lift. I need to see if they can do a more sedate lift and then I might go ahead and become a reseller. I know they are a proven thing as I have first hand seen the dyno charts on a friends engine. Best bit is they are cheap as.