suspension upgrade on the cheap

[s13 james]

i just finished getting my new 70 to mint state and passed rego first go haha starting putting my wheels and bits on then cut then cut the springs to get good wheel fitment.START OF PROBLEM looks sik as low drives ok on smooth roads but bumps and spirited conering makes it bounce like all fuck.Looking around on here i see ppl cut and weld struts to make coilovers,this is no option for me and i gather from what ive read here 86 coilovers like bc's require steering arms? to fit.
what am i best off to do? what parts do i need to 86 bc's coils work or is there a cost effective solution from a wreckers than requires no welding
PS. my s13 sussy was so much easier haha,
thanks guys

[haveaparty]

for the rear get excel short stroke shocks, with falcon ultra low kings cut to suit height, and for the front just get falcon king springs agen cut to suit height, cause ketos dont weigh much the greater spring rate for the heavy falcon works well on the much lighter cars

[s13 james]

thanks for the quick reply mate ill look into it,can it be any model falcon?

[haveaparty]

ba or au ultra low king springs would be easiest to get, auto barns full set of kings is like 250 bucks

[stx-16]

or just stock falcon springs cut to suit

[slide86]

suspension isnt really a safety component, or an important part of your car. So by all means, you should just run cut springs and mismatching shocks.......

If you cant tell, im being sarcastic, if you cant afford to do it right the first time with such an important component of your car, dont do it at all

[lolwat]

+1
why waste money buying all that when you could jsut save a bit more and do it properly

[s13 james]

falcons are like 40 buks at a wreckers and will keep me happy till i have spare cash? thanks for the info haveaparty

[sam2306]

chopped springs and rooted shocks are whats making it really bumpy, also if your lca's are flat it will cause bumpsteer so you'll need rca's also

[trikzlane]

do it properly or dont do it at all, you can also use s13 sussy in the front