Reply With QuoteSounds nasty. I'm keen to know this too. I thought they would all work but what do I know.
Starter motor replacement for smallport
Hey guys,
Sorry if this has been covered before......
starter motor crapped out today, just wondering what other starters I could use.
Motor - 4age smallport
I heard any 4a starter will fit?
Hopefully I havent striped the fly wheel, it was making an awesome grinding sound.
Sounds nasty. I'm keen to know this too. I thought they would all work but what do I know.
one word, NEW.
mine went about a month ago. Go and see a bloke at Auto Electrics Australia over at:
16 Hampshire St
Archerfield 4108
3277 4566
Brand new Denso reduction starter from a 22re for $190 with warranty. The bloke is a celica nut and runs the same setup. He actually changed the front housing on the new one to my old one as the angle of the starter would foul on the exhaust.
Has more than enough torque to turn my motor over, sounds like a truck starting!
Small port are reduction starter. Bigport are direct drive. They all swap over but the reduction starter sorta takes up more space and outputs more torque, not that you need to worry about this on a little 4A. All the direct drive ones are 0.8/0.9/1.0kw units and can be used on swapped with any other direct drive unit as long as you swap the nose over.
The reduction starters are a little different but as long as you get one off a similar sorta car(NOT a diesel corolla) they should work. I'd just get one new or have the old one rebuilt for 150 or so.
Thnx for the info guys.
Def will be putting a new one in.
what are the 20v starters are they gear reduction?
the dyno pull to 300rwkw
BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less
ok so 20v dosnt fit either does 22re so people dont atempt it i just did im going for a smallport one now
the dyno pull to 300rwkw
BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less
22re fits, you need to change the front housing that bolts to the bell housing. i attempted it and won.
do u have pics of how this was done because i stripped my starter and the new 22r and there is no way it was going to work
the dyno pull to 300rwkw
BT20v is making 300rwkw like i said i would without nitrous so now its time for some spray and see if she will run a 10s or less
get pics for you tomorrow/today, when the sun is up.
Posting Permissions