S13 front end in an 86 .... brake bleeding issues?

[ghettorolla]

so yeah, finish off the s13 front end with the sr20 calipers and rotors...

now the issue is ive still got no pedal, no matter how many bajillion times i bleed it, still no pedal
my question was .. is everyone using the sr brake using the standard master cylinder or am i the only retard doing it?

let me know if you got any productive imputt

cheers
dave.

[matt99]

I used the standard master back in my KE. I have no idea what master is in my 86 but both my KE and my 86 ones worked fine.

I know your a mechanic, but the calipers are on the right sides yeah? As in, bleed nipple is above where the line goes into the caliper?

[julzy]

hahahahahahahahahahhahahaha

[ghettorolla]

lol matt ur an ass

yeah all thats shmick ... i duuno, master in the car out side for a while with no fluid in it..
ive re-bench bled it ... bled it from the lines out of the master and individual points on the perportioning valve
.... hmmmm might just throw another master at it .... ffuuuuuu,

u know of any bigger masters that bolt into ae boosters?

[lolwat]

yea s13,14,15 and ABS r34 ones doo, apparently that what you need to use (from the S13 front end thread) but alot of people have said they have had no issues

have you tried jsut gravity bleeding it, when you bench bled it, how hard did it suck back on your finger,

[ghettorolla]

yeah all thats been done .... im just gonna whip off the master .... u know when theyve been sittin dry for a while and the seals and stuff get all crusty and
u run new fluid thru them and yeah fucks everything ..... i belive its one of thoses cases .... something like a primary cup seal in the master ..

hmmm ... hometime and sleep for now ... fk it ... ille attack it in the morning ..


cheers for the helpings

[lolwat]

yea, sitting dry they fuck out really quick

[Bozu]

You can also fit a Mitsubishi Starion Brake Master Cylinder (1") near bolt in on the AE86 only the front line has to be adapted.
But I don't know if this one is bigger then the above mentioned by lolwat.

[cpmgnt]

how did you go with the brakes because im just about to start the s13 conversion in my ae from my tboned s13 didnt even own it for a month till a female driver decided not to give way let alone slow down from her 80-90kph

[lolwat]

oi ghetto rolla , did you use sr turbs rotors and calipers or just De ones?????