The Wagon

[Konakid]

So i bought a Corona wagon, not just any corona wagon.

Its a 22RE, 5speed, pretty straight body, needs a bit of work but it will be sweet.

Parts List so far:

Interior:

360mm Nardi classic
Mad stezza bro
Bride Brix 1's
Cusco Knob


Motor:


K&N filter
New leads, plugs, rocker gasket, rear main, rear g/box seal
Exhaust


Suspension:

Front

Rebuilt rack
Kelway strutbrace
Superpro LCA, sway bar and castor rod bushes.
AJPS RA60 Coilover, 9kg spring
AJPS RA60 RCA
KYB AGX 4 way
RA60 P/S steering arms
Cusco S13 Cambertops
EBC Green Pads
RDA slotted + vented rotors
195/55 RE001's

Rear

AJPS Panhard Rod
AJPS 7KG springs
AJPS Adjustable Spring perches
AJPS Rear Brace
Superpro swaybar bushes
TRD Blue 8 way


Wheels:
Southern Ways Mesh 15x8 -6, 15x8.5 -6

Driveline:

Extweem H/D clutch + pressure plate


Before:

[keto]

its a start henry, especially seeing as you've been left with nothing.

should be a beast when done! is it live axle or IRS rear end?

[svenmate]

yay!

get it cheap?
will have to drive past every now and then to see progress

[SHIFTY5]

fucking gangster

[R&D Mechanical]

Sweet car Henry,

look at Jason's for inspiration.

these go hard, should be nice and easy to skid

[japlish]

it'll be live axle, at least they have 4-link rear end

does it have a w55 or a gay borgwarner box?
to lock the diff in these you have to pull the centre out cause its an enclosed centre so you have to split it, but the good thing is you can re-install yourself cause it uses shims to set the backlash and you just bolt it back in!

the wagons can look ok with a little work (use ra40 lights)

[Water Boy]

Japlish do u have any threads about the build-up of your Corona?

[japlish]

yeah on auszoku. its under rt142 boro skidder.

[mack 10]

[Javal]

W55 with borgwarner.

Clutch in next sunday.