ok. i screwed up i think.....
I think that i am using to many different parts from different cars in the setup of my front sus.
ATM i have-
ST141 struts ready for coilover sleeves
s14 callipers and discs
RA60 front hubs
AE86 LCA
I already have the hub machined down and disc redrilled, along with spacers provided by cruzida (thanks man) so i can use the callipers and discs
Problem is as follows.....
1- ST141 strut wont go on steering arm, bolt spacings incorrect! Ι was going to use the XT130 lower control arm to allow for some more camber.....I heard its good for AE86. Will the strut bolt to the steering arm of an XT130? Both being coronas and all....
2- if i use this steering arm, what will the lock be like? is the arm shorter? longer?
If i can get away with using this LCA and steering arm then im all done and it can go together!
3- If i use this setup, what will i do for RCA? cause its going to be low and all. Custom made ones?
I read through the tech article in the tech section and it provides some good info, but i need to know bout the strut to steering arm problem!
Thanks for all the help....ive kinda already decided that im using the current strut so changing it now will annoy me too much.
any help or advice would be great!
