That would be I.
Pm me.
There are other people on here they make them (unsure if they still do)
Pm Slydar for the cover.
who do i speak to about getting the back plate and small side plate for the 20v also the billet crank angle sensor cover
That would be I.
Pm me.
There are other people on here they make them (unsure if they still do)
Pm Slydar for the cover.
Hey monk, im at this point of the conversion too. Do you have any pics of the plates for the 20v.
- Visionr also do a kit
Well you can see a pic of kizens backing plate in that link you posted. (however im under the impression there nto makign anymore of these for the rest of the year)
I dont have any picks of my plates atm.
Just had a look at the vision R kit ... i did see this for sale on yahoo japan a few months back.
I dont know where to laugh or cry at that price.
we still have a kit available. only the rear water housing is done on an exchange basis at this point. we fairly comprehensively modify the stock thermostat housing do do the same job as our billet rear housing did.
on a positive note now though the kit comes with a newer style dizzy cover that is alot lower profile and alot nicer looking too.
78's
do you have a picture of one of these covers?
also out of interest do you use a C&C for your milled bits?
30kw club
no pics right now sam. ill try to post some in this thread soon.
it is smaller in every dimension and has a radiused edge and on the inside has a chunk milled out of it to just fit over the pickup.
the bolt hole flanges are alot thicker though so the stock dizzy bolts work better (so they dont poke too far through).
78's
I like the sound of that, whats it worth?
30kw club
Just to add, Ken Streeter also has a kit available. Call 07 55 463 033 and he should be able to hook you up.
Run what ya brung...............and make damn sure ya brung enough!!!!
Posting Permissions
