nice one man!
also those levin badges came on every jdm levin, i threw mine away
car looks good man! good luck with the turbo, im doing similar
i have also have a rad support
nice one man!
also those levin badges came on every jdm levin, i threw mine away
The shell is currently at the panel shop getting the front chassis rails straightened
Hopefully I'll organise for the 4AGZE to be delivered next week some time, a replacement radiator support panel has been organised(thanks to truenosedan). Everythings happening but I dont have anything to work on this weekend
..might have to start reconditioning bits and pieces which are going back on the car(brake & clutch cylinders etc.)
hey man the project looks good. Just a word of advice do the w5# conversion asap and diff. I broke 5 t50s in just over a year and did two crown wheel and pinions... i now have a t series and a w58 all has been good besides the one crown wheel and pinion... Good luck with everything.
A quick update!
The shell is back from the panel shop - chassis rails all straightened out! Still to do some small rust repair on the rear guard, hammer out a few dings and flare the rear guards, plus fill in the sunroof and replace the rad support! I got myself a little 150amp MIG welder so am right to start getting stuck into the body!
I now have the engine(4AGZE bottom end) and most of the associated bits and pieces!
..now I'm busting for the Xmas break so I can start getting some stuff done!
your headlights dont look straight bro
But nice .. keep us updated
The front guards/lights/grill/front bar etc are all basically just sitting on there with a couple of cable ties in that pic coz I wanted to see how the freshly painted front bar and lip look. The radiator support panel is f*cked and has been welded up previously with a couple of kinks in it - which means the distance between the front guards is about 10mm shorter then it should be. So the lights and grill dont quite squeeze in there properly at the moment.
This will be fixed once I replace the rad support
coming along well man...
Resurrecting this thread from the the grave!
Some slow progress has been made on this lately, Ive been creating a build log(blog) here:
Feel free to check it out and post comments, still some catching up to do on the blog so stay tuned. Car is currently off getting roll cage installed.
Posting Permissions
