Page 1 of 2 1 2 LastLast
Results 1 to 10 of 17

Thread: Oil pressure

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Bad Email Address
    Join Date
    Feb 2009
    Posts
    167

    Default

    when the car settles into a good idle right on 750rpm. sometimes the standard oil pressure gauge sits right on the lower line for oil pressure.but most the times it sits between the two lines in the middle meaning its got higher oil pressure.still in normal range. what could cause this besides the sender bein faulty?
    oil gallery blocked?

    cheers

    sly

  2. #2
    Oldschool Member
    Join Date
    Nov 2006
    Posts
    65

    Default

    large clearances, can cause low oil pressure. Worn oil pump, but also your gauge may be faulty.

  3. #3
    Bad Email Address
    Join Date
    Feb 2009
    Posts
    167

    Default

    yeah thats the thing the oil pressure seems high. not low

  4. #4
    Oldschool Member
    Join Date
    Nov 2006
    Posts
    65

    Default

    i would get a test oil pressure gauge and plug that straight into the side of the block, that way you will have an accurate reading of what the engine is doing and you dont ahve to rely on a 20 year old gauge to tell you whats going on. but your sender may also be inaccurate to.

    also i would check:
    the oil pressure regulator spring and valve as that may be stuck open allowing excessive amounts of oil through the lubrication system and causing high pressures

    assuming your running a 4age without being told
    oil pressures are:
    @ idle 4.3psi/29kpa
    @3000rpm 36-71psi/245-490kpa

  5. #5
    Bad Email Address
    Join Date
    Jul 2009
    Posts
    1,793

    Default

    ohh right.. read it again... a little on the high side... my bad..

    what weight oil are you running? do you have excessive blow by?

  6. #6
    Bad Email Address
    Join Date
    Feb 2009
    Posts
    167

    Default

    sorry guys yeah ita a bluetop 4age.
    its running 20/50w. which turned black in 3 seconds but thats cause it has just been put in the car and has been sittin on the floor i am guessin for a while. so i am gonna do a oill and filter change and see if it helps.

    yeah its a got a little blow by run alright though.

    cheers for your help its appreciated

  7. #7
    Bad Email Address
    Join Date
    Feb 2009
    Posts
    167

    Default

    the engine has been sittin not the oil

  8. #8
    Bad Email Address
    Join Date
    Jul 2009
    Posts
    1,793

    Default

    i wouldn't be concerned with oil a little on the high side... on the low side i'd be worried!

  9. #9
    Veteran slide86's Avatar
    Join Date
    Nov 2008
    Name
    Huw
    State
    SA
    Location
    Hills
    Country
    Australia
    Posts
    3,526

    Default

    perhaps the relief valve isnt opening properly....that would cause the high pressure

  10. #10
    Senior Member lo_rolla's Avatar
    Join Date
    Dec 2008
    Name
    Damien
    State
    QLD
    Location
    Brissie
    Country
    Australia
    Posts
    681

    Default

    You in brisbane? I'll rebuild you an oil pump if you want...

    (Clean up, machine gears, new valve and spring)
    My AE86 race, street, drift build.

    http://www.ae86drivingclub.com.au/fo...ead.php?t=4156
    With Super Thanks to AJPS for all your AE86 and BBQ needs.

Page 1 of 2 1 2 LastLast

Similar Threads

  1. WTB: Oil Temp and Oil Pressure Guages
    By Futo_gt86 in forum Cars or Parts Wanted
    Replies: 8
    Last Post: 20th November 2011, 09:33 AM
  2. Replies: 4
    Last Post: 16th May 2011, 01:13 AM
  3. FS: Omori Oil Pressure & Oil Temp Gauges
    By Nebuchernezzer in forum Car Parts For Sale
    Replies: 0
    Last Post: 14th November 2007, 07:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •