Hey Guys,
Ran through a few searches and was unable to find an answer to my question...So here goes...By the way, make it simple for me, as Im not too technically minded!!!
Cusco Strut Tops
I have some Front Cusco strut tops, which has camber adjustable pillow ball mounts. Now they are making some clunking noises, and apparently they need a new fiber washer.
Now this clunking:
What would be causing the clunking noise?
How hard is it to source and fit a fiber washer?
Is it possible to recondition the strut top to eliminate this sound?
Can they be reconditioned? What is the cost of a mechanic to do the reconditioning?
Should I fix them, or just bin them, as the cost of fixing this problem would far outweigh the benefits of using them?
Benefits of Strut Tops:
Now I am running, King Spring lows, with Brand new KYB Excel G Struts.
What benefits would I get from these strut tops other than camber adjustability?
How would I adjust my camber to get most of the tyre on the road, yet minimise tyre wear?
Should I run these strut tops, or just continue with the stock tops??
If you could take a time to consider my problems and help out that would be a massive help!
Thanks again 86Club
