Zak's 145KW 86

[Zak]

OK, got some more pics, mostly of the engine to show the intake setup, and also the cooling system. I haven't done too much more, just put the new TRD springs in it, polished back the wheels, and had a new exhaust made up.













Can't really see it, but the piggy back gizzmo fuel controler is mounted in the clock space


Custom intake manifold with 3S-GTE throtal body and 7M-GE injectors


You can sort of see the custom mounts for the supercharger here, and the inlet/outlet of it


Custom (butchered) alternater bracket


You can see the normal water outlet to the radiator blocked up on the head, also the cam angle sensor, and the coil leads coming from the cabin


You can see the pipe that normaly goes from the head to the water pump has been modified. It's now the out let, and the inlet from the radiator goes to the external thermostat then to the water pump










26 - 02 - 2007

I have taken a few more pics. Also found some rust starting around the place

It's not too bad, and I'll be getting it sorted as soon as funds allow.

I have a Link ECU off a mate to put in it to get rid off the piggy back setup that it currently runs.

Other than that not a lot really.











17 - 01 - 2007

Hey, not really a noob, just to the forum

I have just put a deposit down on this we little car, it should be in my garage in two week

If any one has any questions about it, or coments feel free to ask



Engine:
Super Charged 4AGE 20V Silvertop
SC12
4agze MAP / DLI- multicoil ECU with a Gizzmo piggy back
V-Mount Intercooler
Twin core custom radiator with electric fan
Custom alloy Inlet manifold and intercooler piping
Oil Catch can
Ignition coil's mount inside car
De-loomed, Engine loom minimised, engine bay wiring hiden, anything forward of drivers seat not required removed.
4-1 Exhaust manifold lagged
2 1/4 inch exhaust

Driveline:
4agze 6 kg flywheel
225mm solid centre 4 puk ceramic
H/D pressure plate
Nite Parts CNC 4AG - W5# Bell housing
W58 Supra Gearbox - Steel sandwich plate version
Drive-Inn custom 2 peice driveshaft
G series diff (Hilux)
1.5 rebuilt 4.3 ratio LSD

Suspension:

Front - Trd short stroke front shock
8 kg/mm height adjustable
Rose jointed front arms (standard spare)
K-Style Tie rod end spacers

Rear - Rose jointed molly pan hard rod
6kg/mm rear Trd spring
H/D short stroke shocks

Brakes:
Front - Mazda FC RX-7 4 pot caliper and rotors
Rear - Mazda FD RX7 rear calipers large vented rotors
FD hand brake system

Wheels:
15 x 7jj ROH +7 offset
195/50 fronts
195/45 rears

Exterior:
Subaru 2pac cream
Drop vent in bonnet
Passenger and hatch door locks removed
Flared front gaurds
Fibre glass rear flares glassed onto body

Interior:
Tomei Steering wheel
Buddy club gear knob
Cusco fixed back drivers seat
RJS 3 inch 5 point cam lock harness
Splitfire boost gauge

Performance:
Last 1/4 mile
13.7 @ 160 kmph
145kw at wheels

[us_ae86]

OK. That car is just downright nice. I need to use the bathroom now.

[Course_Out]

That looks so hot! I've never seen those ROH's before? And they look like a lower offset than +7?

So hot, biege ftw!

[green_boy_91]

man thats a beast looks sick
how much u payin ?
wanna sell ur wheels wen u get it lol there mad

[slide86]

tim harris' old car hey
still looks great.
nice purchase.

[Zak]

Hey, thanks for the coments.

I'm paying about 10k NZ so it's a pretty good deal for the amount of work done to it.

The off set could be wrong i'll have to double check it when I have it.

I will post up some far better pictures and stuff then as well.

[Zak]

Yip, all credit should be directed at him, as he did just about all the work on the car.

[v-tec]

could have sworn it was that car. So very hot

good buy there mate, loving the supercharged 20v

[MountainRunner]

now thats a AE86 damn HOT

[Stuck]

Just puts stock ADM sprinters to shame.