Hey all,
Yeah, I know, "what wheels should I get" threads have been done to death, but just wanted to ask what people would recommend to my particular situation.
Currently have a set of Simmons 2 Piece mags (which I want to get rid of, because frankly I think they're not real great for my situation), with staggered offset I reckon. Eg, you can't put the back ones on the front or they hit the strut tower. Also, when you turn, it actually fouls on a fold protruding from the body in the wheelarch. This is obviously before you hit full lock too. Mind you, I fitted these mags when the steering and everything was stock, and they were great. It's just now that I've done mods that everything has changed.
So, this is what I'm using now on the front. If I haven't mentioned it, it's stock ok?
AJPS Coilovers with 8kg springs
T3 35mm(?) RCA's
Cusco Camber Tops
Genuine power steering knuckles
Quaife Quickrack
Custom Brackets suiting 4AGZE flavoured AE101 Calipers
Whiteline Swaybar
So I guess that means I'm using stock control arms and caster arms (tension rods, whatever the hell you wanna call em), but that's about it.
Because of the brakes, they need to be at least 15" mags on the front. I want to run something like 205/55/R15's on the front for rubber, to suit the back and still give plenty of grip, but I'll drop down to 195's or 185's if needed. Guessing I should go around a 6" wide mag, with maybe 0 to -15 offset? Something like that? I know for best results I should measure it myself, but just wanted to get a starting idea on what I should be around.
Rears can be like 15x7.5 with 225's or something, but they don't turn so it's not so important to figure what offset to get for them, it's just the front I'm worried about. Any help is mucho appreciato.
Oh yeah, kinda looking at getting a new set of Superlite's to suit my app, lol. Know they're common, but meh, they work, and you can get them close to what you want too.
Thanks guys
