Page 1 of 4 1 2 3 4 LastLast
Results 1 to 10 of 32

Thread: JDM AE86 - Late model panda

  1. #1
    Senior Member
    Join Date
    Apr 2009
    Name
    Nafe
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    460

    Wink

    Item: 1986 JDM Kouki Levin hatch

    Location: Brisbane

    Item Condition: overall, pretty good!

    Price and Payment Conditions: $12,500 with tough engine included but not fitted, $11,000 without tough motor

    Extra Info:
    1986 LATE MODEL JDM AE86
    This car is the perfect drift/street/togue car for people under the new P Plate laws, and anyone wanting a competent, challenging car to drift!
    JDM imported AE86 comes with 4AGE from the factory, so no need to be mod plated, which means it can be driven by p platers!!
    This is a good drift car. I have had it for nearly 2 years and I'm the first/only person to register this vehicle in Australia. The car has been good to me in the time I have had it, and it has taught me to drift reasonably well, and now it is time to move on!

    SUSPENSION
    Front:
    Lowered, stiff springs and shocks, unknown exact spring rate.
    Big Negative Roll Centre Adjusters
    10mm longer Lower Control Arms - More track and camber
    Adjustable camber tops. Can get up to 5.5deg neg camber now
    Strut brace
    brand new rack ends

    Rear:
    Short stroke, stiff rate brand new KYB shocks
    low, stiffer springs. Believe to be TRD, not 100% sure

    ENGINE:
    4AGE 16valve Bigport motor
    rebuilt approx 1500km's ago
    Internally standard.
    HOT genuine cusco extractors. 4-1. fairly long runner, ball collector. Stainless steel
    2in cat back exhaust. "Limit" brand. Nice, tough but quiet sound.
    Chipped ecu in japan + 440cc injectors.
    BRAND NEW 500hp Walbro fuel pump
    Oil changed regularly. Castrol Magnatec 10w-40 and genuine Toyota filter
    New Genuine toyota spark plugs
    TRD style leads

    DRIVE LINE:
    Custom made lightweight, billet steel flywheel. Came from Josh Young's N/A setup
    Custom clutch. 25% heavier pressure plate, 5puk brass sprung plate - approx 18months old. Very good
    Brand new clutch slave and master cylinders
    Large axle disc brake diff fitted with near new TRD 2way LSD. VERY GOOD DIFF
    Gearbox rebuilt in Japan, in good condition.

    BODY:
    Overall in good condition. A few small bits of rust in three of the guards. Rust from tailgate area recently professionally removed and painted.
    Genuine Panda paint
    Late model "eye lid" headlights
    Late model grille + fog lights
    TRD lip on front bumper
    Whiteline tail lights
    Very straight body

    INTERIOR:
    Drivers seat has side bolster adjustment
    Nardi Classic steering wheel
    UNCRACKED DASH!!!
    No sound deadening at all, but still has front carpet
    Late model stripey cluster
    power mirrors
    comes with the GT Apex velour rear seats, but not fitted

    RIMS:
    2x 15x6.5 +8 Linea sport. Small amount of dish, black centre. Very nice wheels
    2x 15x7 +10 Volk racing mesh rims. Silver face, more dish. very nice wheels
    Both pairs come with near new 195/50/15 Bridgestone Turanza tyres
    4x TOMS racing rims. 14x6 +16. Quite rare
    4x 14x5.5 corona advante rims
    2x 15x6 high offset random 5spoke rims - lots of tread

    TOUGH ENGINE:
    Ok, this tough engine is optional, prices marked up top.
    It's is a lightweight stroker crank, seems to be a custom item. very nice
    Light weight AE111 conrods
    Oversized high compression pistons - cast, not forged
    capacity of 1.8l. 200cc over stock
    Head has upgraded valve springs, believe to be TRD
    HKS cams. 256 and 264deg
    ported and polished and shaved
    Brand new ACL racing bearings
    Custom modified sump to hold about a litre extra, and baffles to stop oil surging
    This engine is not put together, but all parts necessary are supplied
    Made 96rwkw with these relatively small cams and without a proper tune. Lots of torque and quite fast. Revs very freely
    Normal 16v engines usually make 70-75rwkw and 20v's make 80-85 usually.

    Pictures:









    Contact Details: PM on here or SMS 0439 754 013. Please don't call between 7am and 6pm as I am at work and won't answer. I can reply to SMS's though.

    ALso comes with about 5months rego

  2. #2
    Senior Member
    Join Date
    May 2009
    Posts
    233

    Default

    pm'd yaaaa

  3. #3
    Veteran v-tec's Avatar
    Join Date
    Dec 2008
    Name
    Grant
    State
    QLD
    Location
    Gold Coast
    Country
    Australia
    Posts
    2,373

    Default

    Good luck Nath

    Well worth the asking price
    http://img530.imageshack.us/img530/731/43367425735d6c87ce7bo.jpg

  4. #4
    Senior Member
    Join Date
    Jan 2009
    Name
    Felix
    State
    QLD
    Location
    Gold Coast
    Country
    Australia
    Posts
    853

    Default

    oh noes!

    spewin that you're selling it nafe

    well worth it guys, should sell quickly

  5. #5
    Senior Member
    Join Date
    Apr 2009
    Name
    Nafe
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    460

    Default

    Grant, thanks man!! Tandem in the new car soon??

    Felix, hehe yeah it's very sad that i'm selling it, but I haven't really got room for it with the new car arriving in a week or so!! I'll miss it alot!! Most func ar ever.

    Roger - PM replied matey

  6. #6
    Senior Member
    Join Date
    May 2009
    Posts
    233

    Default

    pm reply of a reply replied

  7. #7
    Senior Member
    Join Date
    Apr 2009
    Name
    Nafe
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    460

    Default

    Roger, I didn't get your reply man?

  8. #8
    Senior Member
    Join Date
    May 2009
    Posts
    233

    Default

    sent another..

  9. #9
    Senior Member
    Join Date
    Apr 2009
    Name
    Nafe
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    460

    Default

    All pm's replied.
    Car still in my garage guys

  10. #10
    Senior Member
    Join Date
    May 2009
    Posts
    233

    Default

    sent u a message at 12 regarding when i can come look at it

Page 1 of 4 1 2 3 4 LastLast

Similar Threads

  1. late model jdm diff axel $400
    By sunbeam in forum Car Parts For Sale
    Replies: 3
    Last Post: 20th December 2010, 12:34 AM
  2. FS: Complete Late Model JDM Ae86 Disc Rear End
    By AE86Sam in forum Car Parts For Sale
    Replies: 7
    Last Post: 30th May 2008, 10:56 PM
  3. WTD JDM late model bumper brackets
    By Stomp86 in forum Cars or Parts Wanted
    Replies: 1
    Last Post: 10th July 2007, 10:46 PM
  4. WTD late model jdm bumper brackets AE86
    By Stomp86 in forum Cars or Parts Wanted
    Replies: 0
    Last Post: 25th May 2007, 02:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •