is there any crown wheel and pinions i can use in a t series

[gunbz-r]

just curious to see if there is an alternative

[Gilly]

RA40, RA60

try and get 4.1's better than 3.9's

if you have bulk cash (presuming not) get 4.77's

[gunbz-r]

thanks gilly ur a champ, but the heavens have decided to piss on me, so even if i had one, id still couldnt do anythin

[Jonny Rochester]

As far as we know, you can only use bits from other T series diffs. They are found in:
TA22, RA23, RA40, RA60 Celicas.
TE27, TE37, TE47, TE55 etc.. TE72, TE71, AE86, AE95 Corollas
RT104, RT132 Corona

Plus TRD range for the lower ratios.

[gunbz-r]

thanks dudes i got one too late to fit it but i have it so thanx anyway

[ToySprinta]

I dont know if anyone else had come across this, but an RA40 pinion won't fit a T18 banjo. Had to use the RA40 one... The pinion shaft is slightly different length

[mc68]

<div class='quotetop'>QUOTE (Gilly @ Dec 9 2007, 01:13 PM) </div>take advantage of the exchange rate! i got a 4.77 to my door for $410... its surprising the techno sprint crown wheel and pinions on greenline arive in a toyota box, with toyota part numbers wrapped in toyota bags....
i think they are made for toyota!

[gunbz-r]

i do wanna go to 4.7's, is urs fitted yet, i just want it to go like a 6 speed ae111

[ae71neo]

<div class='quotetop'>QUOTE (mc68 @ Dec 9 2007, 10:18 PM) </div>take advantage of the exchange rate! i got a 4.77 to my door for $410... its surprising the techno sprint crown wheel and pinions on greenline arive in a toyota box, with toyota part numbers wrapped in toyota bags....
i think they are made for toyota!
[/b][/quote]

Ha thats how mine arrived also! I thought they may have mucked up, and it was a TRD one.

Oh well, still rad.

[Gilly]

Toyota make them for TRD, they are a genuine part as far as i'm aware

which is very very cool..