EMS dual sport ECU

[Mr.CA]

hey people i have a EMS dual sport ecu for sale

This is a high boost version 4.5 and can be programed to run up to 16 injectors
It will work on all 4, 6 and 8 cylinder engines. But the ECU has a map for a 8sec FJ20 gemmi atm, but retune will fix that
so it can be used for what evey ya want
This ECU has just been checked out by EMS and is a good working unit

The EMS ECU comes with a wiring harness and hand controller.


price is $600 +postage

cheers
Mike

[Tunney]

whats the lowest you will go for cash and do you have any booklets for it or anything ?

[Mr.CA]

hey dude i have a full manual for the ecu

i paid $600 + postage for it

but pm me your offer

cheers\
Mike

[stefan]

full replacment ecu or just piggy back>?

[Mr.CA]

The ECU is a full replacement unit.
It has built in functions . like anti lag or launch control. turbo timer, boost control
It also controls thermo fans, nos, up to 16 injectors> It can fire 1,2,4 coils on a four cylinder It can control 4 6 8 12 cylinder or rotary engines
The wiring loom needs to have your plugs for injectors and sensors put on it to suit your motor
It does not use a AFM. It runs of MAP sensor built into the unit. And it's a high boost version capable of mapping 50 psi boost
The only sensors and out puts connected on my car is, the MAP sensor, the metric temp sender, crank angle sensor and module "ignitor" to fire the coils.
I don't use O2, TPS, Stepper motor (for cold start)
But all these can be connected if I want to later depending on what I want the ECU to do.

cheers
Mike

[dirty_86]

will this be ok to run a 4AGZE with a turbo

[Mr.CA]

<div class='quotetop'>QUOTE (drif86s @ May 5 2008, 03:52 PM) </div>99.9% sure it will do the job fine
but i will ring EMS 2day just to be 100% sure for ya :2thumbs:

cheers
Mike

[vhr32]

I have one of these on my RB20DET and can say they are VERY reliable.

I paid $2200 for mine with a few options back in 2003.

They will run basically any engine but they don't have stepper motor control or closed loop which you don't need anyway.

[Mr.CA]

yeah man it will run ya 4A fine dude

yeah i have`nt had any probs with mine and has a number on things on it
has been a good ecu too me

BUMPY!

[driftkid]

if 4a is magnetic dizzy not optical then u will need an ems ti ( i have one forsale )