have you checked these for fit with the altessa mounts ant.... mine is almost out of the car will let you know tomorow
only tested with 3sfe townace and sxe10 3sge flywheels. (both rwd from factory). The problem with celica cna mr2 flywheels is the starter is on the other side of the flywheel and the teeth on the ring gear have been cut accordingly. How much of a problem this is remains to be seen.
have you checked these for fit with the altessa mounts ant.... mine is almost out of the car will let you know tomorow
RIP Carly - a smile to light the world.
06/07/2011
What is the outer diameter of the townace 3sfe and sxe10 flywheels? I'll compare it with the sw20 one. I am planning on flipping over the ring gear so that the teeth are bevelled the right way for rwd like s14seriesII has done.
The depth issue doesn't worry me as I can space it out easily just need to get the starter positioned right so that it meshes correctly with the ring gear
Just answered my own question. I assume that the townace 3sfe flywheel is the same
The Altezza (SXE10) overall diameter from the ring gear is ~294.6mm, the MR2 (SW20) flywheel is ~305mm. I received confirmation from both Toda and Jun about the difference in size.
whoa! the extension of your clutch slave is stupendous. looks like you need to lengthen the fork pivot out a bit.
nah its fine
theres more than enough room for the throwout to slide on. However if it were more id have to extend the throwout bearing carrier to keep it on the shaft. Thats pretty border line tho.
i found a 99 model 3sge out of celica fwd i guess this is gen3
its not beams