4age Water pumps and thermostat housings

[marklevin]

hey all
i am building a 4agte, using a 7rib block from a 20v, and a 16V head from a FWD bigport.

1. Does the AE86 RWD thermostat housing and water pump fit onto the 20v block?. I have the JDM ae86 alternator bracket.

2. Do i then have to use the 16V harmonic ballancer to make the pulleys line up? does this fit on the larger crank?

thanks allot

[rthy]

1. yes

2. the alignment of the crank pulleys are all the same, you have two options, a rwd water pump front with a rwd pulley or a fwd pump front with a fwd pulley

[Golberg]

Be aware that if you use the RWD rear housing you wont be able to use the AE86 heater return pipe on the back of it if the 20V has a knock sensor.

[rthy]

oh yeah I forgot about that one!

I modified mine:




but you can just chop it shorter and get a longer hose/hose extension

[marklevin]

thanks allot guys, its all clear to me know. Not long now until it is built, blocks bored, heads ready, can't WAIT