<div class='quotetop'>QUOTE (johnk84 @ Jul 26 2008, 05:08 PM) </div>OS Giken, ATS, KAZZ, TRD, etc ... all make G-series LSD's that will fit into your housing
BUT there is a catch, while they *fit*, you need to do two things
1) Make a spacer plate that's 3mm thick, to space the crown wheel from the centre .. not hard, just a big ring with some holes drilled in it
2) Buy different bearings to suit (any diff shop should be able to work this out, if not, they shouldn't be touching your diff)
If you want a less agressive, straight-bolt-in option, there are some TrueTrac LSD's etc available from the states, aren't too expensive either, just not quite the same as your clutch-based alternatives