Make sure the axles are completely out.
Get a crows foot and a mallet and lever it out behind the bearings or keep going with the slide hammer. They can be a real C**t to get out.
having a few problems diff centre doesnt wana let go my old man got a flange sorta thing welded up do it would bolt onto the slidehammer and the front of the diff and tried it today still wouldn't budge, any ideas?
Make sure the axles are completely out.
Get a crows foot and a mallet and lever it out behind the bearings or keep going with the slide hammer. They can be a real C**t to get out.
数独のガレージ "Sudoku Garage" <3<3<3
yeah the axles r out the old man took em out, i also tried jammin a screwdriver in there n using a mallet no go.
last time I did this I used a big rubber mallett and belted the side of the centre one side at a time until it loosened up.
screw driver wont do shit! get a crow bar or somethin that pulls nice and belt the fuk outa it!
数独のガレージ "Sudoku Garage" <3<3<3
Make sure you have undone all the bolts on the centre
<div class='quotetop'>QUOTE (sprintdaddy @ Aug 5 2008, 11:09 PM) </div>
haha I've been caught by that before, spent a whole day swearing and hitting the fkn thing before finding another bolt under the greasy shit around the centre.
big arse pole behind it n wedge it out
Posting Permissions