Reply With QuoteYou don't need 3 threads asking the same question in a different way....
But as for your issue, I'd recommend ringing a few of the importers down there to see if they can recommend an Auto electrician for you.
4agze into ae86 wiring help
Hey guys its been a week since I swapped engines over and still nothing has been done lol, if anyone could help in some way that would be good, or even if someone could recommend me where to go and get it done, thanks heaps in advance... Cheers
You don't need 3 threads asking the same question in a different way....
But as for your issue, I'd recommend ringing a few of the importers down there to see if they can recommend an Auto electrician for you.
Ok, let's start with what diagrams/pinouts you're referring off, what you've done and what is working. What engine do you have?
I just done a 4agze conversion into my ae86, I followed a step by step DIY on club4ag, didnt get anything happening till today, got spark and power at the ignitors, CAS etc, fuel pump working also, car is cranking but wont start, the wiring loom that came with the 4agze was hacked so its been abit tricky, also my 86 was a 4age before this not a 4ac
You shouldn't have power at the CAS???
How good is the spark?
Timing gunned it?
Fuel pressure?
Your right no power at CAS, and spark was pretty strong... As for timing and fuel pressure I havent checked, doesnt the car have to be running to timing gun it?
Check power at the injectors and listen for your fuel pump.
If you have spark, then it is reasonably safe to say the coil + ignitor / ecu are right.
The fuel pump is working, the Injectors I checked with a test light apparently I have to check injector pulse dunno how tho, yeh it has good spark thats good to know theyre right
Posting Permissions