TRD LSD initial torque.

[odessy]

Was looking at a used TRD 2way and an initial torque figure is given of 5 not sure of units, kg.m?

I presume this is a measure of how worn the centre is? If so what is a health figure? Was just going to get a centre and get the T3 rebuild kit anyways.

Also if anyone can read japanase, it specifies that its for an ae86 previous term, by this do they mean zenki models?

[Celica RA45]

it should be 120 foot lbs of breaking force when new

[44GTE]

Hi

Previous / prior term is Zenki which suits 23.8 (24mm) axles

cheeers

[odessy]

Thanks and thanks .

So 5 Kg.m seems to be quite alot lower than a brand new one( 120 lb.ft = 16.6 kg.m). Where did you get that figure from?

[Celica RA45]

we tested a new f series trd lsd with axle in 1 side bolted to vice and another small 1 from irear with nut welded to it and then had tension wrench attached to give use this figure