20v overheating problem

[evil86]

Hey guy im having overheating problems with my 20v. at idle it will reach 98 degress. what ive notice is that my bottom pipe is not hot and other pipe may not have any pressure. can someone confirm if my water routing is right. sorry to be annoying


Top radiator hose - engine - Rear bypass - heater core - heater tap - back of water pump - thermo housing - bottom hose

[Sam-Q]

nothing wrong with that, you say you don't have pressure in your top hose?

[Vaughn]

hmm your radiator is all good?

are any lines kinked?

you have sq rwd kit right?

[evil86]

Top is hot bottom is not so hot

[Sam-Q]

well that would be normal to some extent. Although it does at this stage point the finger at your pump. What fan are you using?

[evil86]

Brand new aftermarket pump and twin 10" thermos

[Sam-Q]

post some pictures of your setup then

[evil86]

After work as im in the spray booth at the moment.

thanks for posting interest Sam

[evil86]

After work as im in the spray booth at the moment.

thanks for posting interest Sam

[Rice86]

I know your microtech display shows at 98, but check the standard temp gauge see if it's also reading high,
Check your thermostate.. Maybe take it out and see if your get a cooler temperature reading for testing purpose..