JZX90 1J into MX83....

[FLT LNR]

I know this is not really the site for this thing but i cant find anything useful on toymods or jzxproject....

Engine mounts.....do i need jzx80's or does this swapping around my origional mx83 mounts actually work....

if anyone knows specifics please pm or reply..

thx

[slide86]

LOL

you couldnt find anything useful on toymods???? really???? and you actually looked??

google must also be offline.......oh hang on:



and then



and then



and then



and then



yeah i guess toymods has no useful info

[chrisjjanfd3s]

From memory the jzx90 mounts will work fine and the sump is perfect because its a front sump. I'm fairly sure that the jzx81 and jzx90 is extremely similar

[slide86]

you need jzx81 engine mounts and crossmember......or jzx81 engine mounts and series 2 mx83 crossmember......only way to make it spot on.....factory fit

[chrisjjanfd3s]

Jzx90 is the same as jzx81 except there reversed i.e inlet is on the exhaust side and vice versa

[ae71]

they 'work' but are not the same.

Jzx81 make the motor sit PERFECT.

jzx81 and jzx90 are a a lot different ouside of the motor, box and diff (centre). Chassis/suspension is completely different.

And if you couldnt find any info on toymods then you fail at internet

[dr1ft-pig]

yeah^^ this is correct... s2 x member, switch engine mounts

[meadan]

jzx81 engine mounts can still be bought new from toyota(cheap too) if you ask the right people, FYI.

[FLT LNR]

toymods kept giving me wiring info.....
and everyone is so vauge on the subject...i wanted a definate yes or no before i spend money....
does anyone know where to purchase a jzx81 crossmember and the engine mounts.....
toyota wasn't very helpful over the phone...some chick who was so lost i thought i called a kindergarden
thx

[Anticeptik]

I'm doing it now/done it.

Jzx90 mounts will work.
Flip them around.
K frame. Use a mx83 series 2. Same as jzx81.
gearbox. Flip the x member around.

Anything else?