Now Ive made a few more strides towards finishing this. I have adjusted and fitted the gaskets to the throttle bodies. Now they all sync correctly and stop at the right place, and I shouldnt need to remove them again from the manifold.

Ive put oil in the diff and rotated the axles to lube the gears.

Ive done up the cooling system under the car, I have to strap in the efi pump and connect the wiring but its all there as far as pumps, surge tank, and lines and filter.

Ive purchased a new fuel reg from Tomei for it. Should arrive soon. Then everything is new in the fuel system and I can expect perfect fuel.

Rear brakes are rebuilt completely. Brakes are bled, so thats clutch brakes and accelerator all connected.

Once I mount the efi pump Ill adjust the drums, and do up the last couple of bolts on the handbrake cables and it can be rolling again.

I might take the chance to run the wiring from the fuel pumps to the front of the car for Justin to connect to.