Camber Top Studs

[Jono.C]

G'day. I bought universal camber tops (that you drill to suit) but they don't come with the studs as supposedly you use the one's from your original top hat.

I emailed the guys and they said they can't supply them either.

Any ideas where i'd go about purchasing said studs?

Cheers

[dying3k]

bolt and nut, all mine are

[Jono.C]

I'd prefer actual studs if possible. As in pressed into the camber top. Not too keen on a K&D fix if possible.. ha

[dying3k]

ok, have you got a good, nut and bolt store locally or something???, go there with the camber top (drilled) and they may have studs to suit or very close

[Cerby86]

Nuts and bolts out in norchy. Have a chat to them, if they don't have it your stuffed hahah

[Jono.C]

Well the otomoto kit which is the same as mine came with studs. So they must be avaliable some how? haha. Cheers cerby i'll take a look out there and see what they have.

Was hoping to be able to just buy the proper studs from somewhere, but it's not looking possible

[Rice86]

If you have original Top hat. Screw the nut onto the studs and hammer them downwards, they will come out

[Jono.C]

^ I had this thought, I want to keep my original top hats as they are because aren't as common as i'd like if i need to get through rego again.

I remembered i have both ke70 and t18 top hats so i'll knock the studs out of them and see which'll fit.

Cheers!

[Rice86]

assume that are all 80s car, or even corolla family related, im sure toyota used all the same studs for the top hats..you should be fine =]

[Jono.C]

Well it's for a ke10 So i want to keep my original strut tops. I just knocked some studs out of ke70 one's which look the same just a little bit shorter.

The ke10 has a hat that sits over the strut top so i can just bolt that over the top of the camber top for stealth

I also had ke55 one's but they're much thicker than 70 ones.

Cheers for the help!