[BNE] W5x G/box Crossmember + JDM EFI fuel tank (both suit AE86)

[PuGZoR]

Hi all,

Alright, I need the following:

1) W5x gearbox crossmember to fit on an AE86. It's going on an AE101 4AGZE block with a Niteparts bellhousing. I'd imagine that any crossmember made for a 4A to W5x should be fine, but thought I'd say that anyway.

2) JDM EFI fuel tank with in-tank pump. I don't care if the pump doesn't work (as long as I know), but I just want everything because I'm sick of cutting stuff. Yes, this needs to have come off an AE86.

3) Bit of a long shot, but after a shifter for a W5x too. I unsuccessfully tried to modify mine... Need one that has a friendly throw for an AE86, too. I've got a W58 (supposedly from a non-turbo JZA80), if that counts for anything.

Thanks.

[PuGZoR]

Shameless bumpage... might have a shifter sorted but not 100%.

[Golberg]

Are you sure its a JZA80 shifter you are after? They are totally different to any of the other ones as they are an external shifter. Would come up just in front of where the handbrake lever bolts down if you had one.

[PuGZoR]

Yeah, probably not hey. It's a W58, but definitely doesn't have the external shifter with linkages.

[44GTE]

Hi Andy

I have the JDM EFI pump setups available if you get stuck. Will go straight into the ADM tanks . Only difference is the ADM arn't baffled and will get surge on hard RH corners when below 1/4 tank

Let us know

Otherwise have a JDM tank but it will need a clean out and reseal/ treatment as has rust inside.


Cheers

[Sam-Q]

apparently the auto mx83 gearbox crossmember bolts up

[Golberg]

Interesting, I'll have to give that one a go when I'm up to that stage myself.

[DR86FT]

I have a shifter position that is the furthest forward position for a w5x