SA: > R31, R30, volvo, B&M, audioline, amp, sumitomo, springs, also custom exhausts

[hall sales]

Items in SA

14X7 5 stud rims 0off with 215-65 tyres @ 80% even to suit torana/volvo or similar stud pattern $200


R31 left and right 28 spline axels $20 each


L24E engine and auto trans + pump 170,000 $150


R30 170,000k dash cluster $50


2X 225-50-R16 bridgestone G3 tyres with 60% even no camber use $50

2X 225-50-R16 falken semi slicks 40% even $50

CA18det stainless exhaust mani to suit external gate, perfect cond (going back to internal) $200


R30 low King springs front + pedders rear and after market Munroe shock absorbers (under 5k use) $150. (only 1 rear in pic)



-1X B&M line locker for not destroying your brakes whilst spinning the rear wheels. $160 installed and rear brakes bled

-R31 S3 tinted front indicators from front of this $20ono, $30 posted

-JDM BLAZE universal alloy gearknob. baller knob. $60ono, $70 posted

-audioline 6.5" split system 120W rms $150. cost $260 in mid 08' (blue kevlar cone)


Whiteline Nissan bluebird 910 aftermarket front swaybar with linkages and bushes
$150


-Full wiring kit for amp with all wires $15

-Pioneer Sub and pioneer compact box unsure of model 250wrms or over $75


-response amp. 2X150wrms. only works in bridged mode $100 . (or 15" sub n amp for $180)


-Some 2way amp, around 350wrms bridged (160wrms per channel normal) $60


pair of rims with sumitomo 195-50-R15 tyres @ 70% 15X7 +20 clear r32 brakes easy. stealth as, or just remove paint with wax and grease remover to restore them. $350


-pioneer 2way 6inch $35


-Greddy catch can with oversized fittings and drain arrangement. $75


R31 skyline/pintara with RB20 turbo back 3" mandrill bent Exhaust with muffler or side pipe option in stainless steel. System finishes before the differential. Muffler is Lukey race stainless series



$350


/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

-Also can do 2.5" and 3" mandrel bent exhaust systems now as i have thrown 2k at a mig welder. 4" exhausts also possible as im doing one on my pintara. Price dependant on car but for 2.5" mandrel bent it will be approx (150-250 - pending design) no mufflers with 2 flanges. (cat/extractors back)

also doing turbo back with separate screamers, etc

doing intercooler piping in mild steel aswell. pm for quotes. design dependant on what owner wants.

[20v ae71]

those 5 stud 14x7's wouldn't happen to have 5x120 (HQ, BMW) stud pattern? if so consider them sold

edit: torana/volvo are 5x108

[20v ae71]

also pretty interested in a 2.5'' exhaust for my ae71. 2.5'' from turbo dumper back, no mufflers, under the diff, 3 flanges (dump pipe, mid flange, rear after diff)

[sly1300]

any pics of 14x7 5 studders? 5 x 114?

hoping for 5x114 stud pattern to fit ford/yota 5 stud.

wouldnt mind stretching some skinny tyres on em and whitewalling them for my lo-lux.

[hall sales]

yep wrong pattern.

different PCD.

PM sent

[MJ86]

Hey mate are you doing the exhausts as a commercial setup because if you are you should be talking to admin first otherwise you could find your thread deleted.

[hall sales]

not really, just doing bits hear and there for people for cheap. basically to pay off the welder. lol

i can be contacted on 0432 224 954 at any time