EOI/SWAP Trev's AE71 4ag sedan (BNE QLD), Swap For 250cc Sports Bike: FZR, CBR, RGV

[Trev084]

tem: AE71 CS Sedan.

Location: Brassall, Ipswich (Brisbane West).

Website: Here

Item Condition: Very Very clean, Tiny rust spot in boot seal and a couple of small body dents (shopping centre etc), Car only has 160,000k's on the clock.

Reason for Selling: Kinda over it.

Price and Payment Conditions: EOI or swap for 250cc sports bike like a CBR, FZR, RGV etc.

Extra Info: Car is fitted with a bigport 4ag running twin 45mm dcoe weber carbs, Has been converted to a manual which the T50 was rebuilt by me and has not been used as yet, Ignition system is a hyperpak with custom loom made by me, I have customised a ke70 van 1 piece tailshaft to suit the car, Has the standard rear diff and brakes, Front brakes/struts are ADM AE86's, Has the standard interior apart from ae71 tacho installed in the dash and a boot/fuel popper (fuel not hooked up), Has brand new JDM water system and alternator setup, Springs are brand new king lows, Sits on 14x6 bathurst globes (NOT CHALLENGERS).

The car runs and can be driven but needs the fuel pump installed (supplied), The clutch line needs a slight modification & the exhaust needs a slight mod (extractors to exhaust)


Pictures: Will get some good ones during the week (most of you should know what it looks like).

Contact Details: PM or REPLY

[Rolla_Mad]

sounds pretty good cant wait to see photos

[scott_22]

price would be sweet.

[08ftwyo]

Even though its an EOI, give us a rough price. I really have no idea how much something like this is worth. Everybody ask's a different price.

[Trev084]

I think that 4k would be a very fair price, I have spent quite a bit on this car and it is extremely hard to find one in this condition, I didn't even want to cut a hole in the firewall for the clutch master, If anyone thinks that it is too expensive then go and look at the prices and condition of other ae71's that have been modified and thrashed.

[munki]

expressing interest, how is the tune? and what would it need for roadworthy minus whats mentioned already?

cheers

Daniel

[Trev084]

I have only revved/ran the car stationary, The carbs were built for a 4ag bigport running bigger cams (mine are stock), Would need a bonnet support (modified it for the front mount when i was going turbo), Is not engineered, Not sure what else it would need.

[munki]

cheers for the quick reply. Im really looking for a car ready to go to replace my fiesta, not another project.

thanks anyways

Daniel.

[flamingheads]

Sounds nice. I'll be very interested to have a look at this in 2 or 3 weeks if it's still for sale. Good luck with it.

[macca1590]

pmed, very intersted