Steering issues! Bump steer etc!!! Advice?!
Ok so over the last 6month the bump steer in my Hachi has got progressively worse, to the point it's scary at higher speeds( sharp turns the car will pull violently like a $5 hooker). And when I turn in hard and return the steering on corner exit there is a big clunk! I have had a look under the car and nothing looks broken or out of whack ( i will get my mech to check and get a wheel alignment). So I'm thinking of upgrading some steering parts.
My question is what are the parts i need to try and combat this violent bump steer?
What I am running so far:-
-Corona LCA
-Power steering arms
-RA outer tie rod ends
-RCA spacers
-2inch lower 6kg spring (I think, could be harder)
-KYB yellow shocks
-urethane rack bushes.
Going to upgrade/purchase:-
-outer tie rods (read that I should use power steer ones because I'm using PS arms)
-hardened inner tie rods (PS or non PS?)
-castor rods
-adj camber tops
- front lower radius rod tie bar
Too much? Anything missing or more importantly anything that I should address first?
Any advice would be great.
-Ade Mc-
Reply With Quote