Would anyone be able to give me any information from previous experience on minimum stroke on an 86?
I have a std length strut case, i'm looking at bumping the cartridge to the bottom and machining up a spacer for the top, and i have 6kg springs.

From a rough measurement i should have 90mm of stroke (full extension to bottomed out)
I realise this isn't much stroke at all but could it work on a street driven car?
I have ran a similar set up with around a 20mm higher ride height and a softer spring
which bottomed out once (under hard braking on a bumpy road).
I will 'preload' the 6kg spring to a certain extent.

Has anyone ran a 6kg spring with a similar stroke on std length cases and had any problems with it?

Advice would be appreciated, cynicism, not so much....